• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Problem by connecting to duetwifi from browser

Scheduled Pinned Locked Moved
Duet Hardware and wiring
4
5
1.0k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    DR8
    last edited by 13 May 2018, 15:31

    So the problem that i have is that I can't connect with the IP adress to the duet board. I followed all the steps presented here: https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7?lang=en. Panel Due shows ,,Connected" Wifi module is connected to the access point........ IP adress:......... And when I type in the browser the specific IP adress i get no page found

    undefined 1 Reply Last reply 14 May 2018, 03:29 Reply Quote 0
    • undefined
      dc42 administrators
      last edited by 13 May 2018, 17:47

      Which firmware version are you using, and which browser?

      On some tablets and smartphones you need to type http:// in front of the IP address in the address bar, because otherwise the browser defaults to https.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • undefined
        3DPMicro @DR8
        last edited by 14 May 2018, 03:29

        @dr8
        I had the same issue with my Duet Ethernet. Possibly some useful information here. https://forum.duet3d.com/topic/4226/dwc-won-t-open-what-am-i-missing-solved.

        Duet controlled Lathe, micro mill, 3d printer and 1992 Haas VF2 VMC

        1 Reply Last reply Reply Quote 0
        • undefined
          DR8
          last edited by DR8 15 May 2018, 12:13

          Unfortunately, i was not so careful and I did not had the WWW folder on the SD card. That's why it did not work.

          undefined 1 Reply Last reply 15 May 2018, 18:52 Reply Quote 2
          • undefined
            T3P3Tony administrators @DR8
            last edited by 15 May 2018, 18:52

            @dr8 Thanks for your report. Its good to know the reason and no doubt this will help others!

            www.duet3d.com

            1 Reply Last reply Reply Quote 0
            4 out of 5
            • First post
              4/5
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA