Duet wifi lost web connection

avaradus

@dc42 now i'm returned to WiFi Server Version: 1.21 and IMHO problem solved ?
Printer have uptume Last reset 98:00:53 ago, cause: power up
And connection not lost all that time!

May be wifiserver version 1.23 totally consumes memory then controller lost any connection, and freezes.

dc42

@avaradus said in Duet wifi lost web connection:

@dc42 now i'm returned to WiFi Server Version: 1.21 and IMHO problem solved ?
Printer have uptume Last reset 98:00:53 ago, cause: power up
And connection not lost all that time!

May be wifiserver version 1.23 totally consumes memory then controller lost any connection, and freezes.

Unlikely. Please try switching between 1.21 and 1.23 enough to be certain that there is a correlation between the DuetWiFiServer version and the problem occurring.

If you connect a USB host and send M111 P14 S1 then you may get some useful WiFi diagnostic messages reported to USB.

avaradus

@dc42 Yes unlikely. Now with wifi server 1.21 again connection lost =(
With M122 I see Used output buffers: 24 of 24 (24 max)
All connection DWC to DUET is canceled.
i try disable wifi with M522 S-1 but used buffers is not release.
Automatic release of buffers is broken and not work =(

mat100

Hi,

We have same problem with freezing duets in longer prints. Is this problem already solved ?

Thank, Supik (TriLAB)

mat100

Hi,

below I am sending a diagnostic report from today's freezing

Recv: === Diagnostics ===
Recv: RepRapFirmware for Duet 2 WiFi/Ethernet version 2.03trilab7 running on Duet Ethernet 1.02 or later
Recv: Board ID: 08DGM-917NK-F2MS4-7J1FD-3S86T-1ZTDD
Recv: Used output buffers: 24 of 24 (24 max)
Recv: === RTOS ===
Recv: Static ram: 25708
Recv: Dynamic ram: 93672 of which 312 recycled
Recv: Exception stack ram used: 532
Recv: Never used ram: 10848
Recv: Tasks: NETWORK(ready,472) HEAT(blocked,1236) MAIN(running,372) IDLE(ready,160)
Recv: Owned mutexes:
Recv: === Platform ===
Recv: Last reset 13:34:00 ago, cause: software
Recv: Last software reset at 2019-10-08 18:48, reason: User, spinning module GCodes, available RAM 11072 bytes (slot 3)
Recv: Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Recv: Error status: 4
Recv: Free file entries: 9
Recv: SD card 0 detected, interface speed: 20.0MBytes/sec
Recv: SD card longest block write time: 0.0ms, max retries 0
Recv: MCU temperature: min 44.0, current 44.4, max 44.6
Recv: Supply voltage: min 23.0, current 23.5, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
Recv: Driver 0: ok, SG min/max 0/171
Recv: Driver 1: ok, SG min/max 26/153
Recv: Driver 2: ok, SG min/max 0/168
Recv: Driver 3: ok, SG min/max 0/1023
Recv: Driver 4: standstill, SG min/max not available
Recv: Date/time: 2019-10-09 08:23:40
Recv: Cache data hit count 4294967295
Recv: Slowest loop: 1.96ms; fastest: 0.07ms
Recv: I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
Recv: === Move ===
Recv: Hiccups: 0, FreeDm: 141, MinFreeDm: 89, MaxWait: 0ms
Recv: Bed compensation in use: mesh, comp offset 0.000
Recv: === DDARing ===
Recv: Scheduled moves: 1699629, completed moves: 1699589, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
Recv: === Heat ===
Recv: Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Recv: Heater 0 is on, I-accum = 0.2
Recv: Heater 1 is on, I-accum = 0.7
Recv: === GCodes ===
Recv: Segments left: 1
Recv: Stack records: 2 allocated, 0 in use
Recv: Movement lock held by null
Recv: http is idle in state(s) 0
Recv: telnet is idle in state(s) 0
Recv: file is doing "G1 X-16.905 Y-13.359 E0.01805 F1249.6" in state(s) 0
Recv: serial is idle in state(s) 0
Recv: aux is idle in state(s) 0
Recv: daemon is idle in state(s) 0
Recv: queue is idle in state(s) 0
Recv: autopause is idle in state(s) 0
Recv: Code queue is not empty:
Recv: Queued 'M106 S153' for move 1699600
Recv: Queued 'M106 S184' for move 1699601
Recv: 2 of 16 codes have been queued.
Recv: === Network ===
Recv: Slowest loop: 1.05ms; fastest: 0.02ms
Recv: Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
Recv: HTTP sessions: 0 of 8
Recv: Interface state 5, link 100Mbps full duplex

avaradus

@mat100 i'm using latest firmware and problem is still there =(
@dc42 hey ! help plz ! we need very-very to fix this problem. Longer prints now is a big problem with freeze printer =(

mat100

@avaradus

Hi,

I couldn't figure out where the memory leak occurred. I tried to make a temporary fix - automatic reset when the buffer overflow.

Can you test this firmware ? (Based on version 2.04RC3)

https://github.com/mat100/RepRapFirmware/releases/tag/2.04RC3-fix-freeze

Matej

avaradus

@mat100 Automatic reset (reboot) printer ?

Dougal1957

This post is deleted!

felix9t

I now get the same error during homing on RRF 3.0beta12.. DO you know the reason for that?
Bildschirmfoto 2019-11-05 um 14.47.36.png

felix9t

This post is deleted!

tracar

same problem here exactly as above.., web interface hangs,

Phaedrux

@tracar said in Duet wifi lost web connection:

same problem here exactly as above.., web interface hangs,

This thread is very old and discusses very old firmware. I suggest you start a new thread with your issue. Are you running up to date firmware?