GET3D free give away free extruder.

Get3D

Sorry about that the 25th person will also get one.

Get3D

Each 10th member receives FREE Extruder
To celebrate the launch of GET3D, we will give away 10 FREE Extruders in total! To participate, please register to our forum. Each 10th member will receive a FREE Extruder!

I changed it to every 10th person maybe that will help out. I hope everyone does get mad at that hope this will make it better. They are very hi- end extruders.

you missed the point; "we'll draw 10 lucky winners from the first 100 new members" would ammend the issue synapsis highlighted..

Get3D

The number of people on the forum has nothing to do with the winners of the extruders.

infiniteloop

Alright, Seven of Nine has no luck with this. But what about me? I have a dual print head. Will I get two FREE extruders if I’m the first, the 10th, or the 25th? Or will @Synapsis get the total of 10 if he recruits 100 members? In my opinion, @bearer earns at least one of your extruders due to his proposal: it’s the single reasonable procedure.

zapta

Any other reason to join your forum other than free extrudes? You may want to elaborate your vision.

Get3D

I just did the forum so people could help each other if they buy the extruders.

jay_s_uk

Today I received a parcel in the post containing a Get3D extruder.
I've had a quick look over it but I don't want to pass judgement on it too soon.
In the meantime, I wanted to share some more detailed photos. I was sent the high temperature direct version, which is fitted with a 100w 24v heater cartridge and a 'K' type thermocouple.

elmoret

100 watts! Uncontrolled, that could get over 800C!

jens55

Looks like a nice setup ! ... and yes, a bit scary at 100W

fcwilt

Not impressed.

Frederick

jens55

@fcwilt said in GET3D free give away free extruder.:

Not impressed.

Frederick

why ?

fcwilt

@jens55 said in GET3D free give away free extruder.:

@fcwilt said in GET3D free give away free extruder.:

Not impressed.

Frederick

why ?

Well for one it looks like a prototype, not a quality production unit.

And I would prefer a unit that took up vertical space instead of horizontal space.

All of the printers I have built had a surplus of vertical space compared to horizontal space.

Frederick

jens55

Good point about vertical vs horizontal space requirements but the bit about a prototype (which it likely is since it was just released) seems a bit harsh.

fcwilt

@jens55 said in GET3D free give away free extruder.:

Good point about vertical vs horizontal space requirements but the bit about a prototype (which it likely is since it was just released) seems a bit harsh.

It's a "production unit" since it was shipped to a customer unless the customer knew he was getting a prototype, which he doesn't say in his post.

Frederick

jens55

Since it was a freebee, I don't think the strict thinking you are applying is entirely fair. I still think that other than the fan mounting plate, it is a very nice looking unit be it production or prototype. My only concern would be being locked into one supplier for spares which tends to get expensive quickly.

fcwilt

@jens55 said in GET3D free give away free extruder.:

Since it was a freebee, I don't think the strict thinking you are applying is entirely fair. I still think that other than the fan mounting plate, it is a very nice looking unit be it production or prototype. My only concern would be being locked into one supplier for spares which tends to get expensive quickly.

You may be right but if I was trying to gain customers the first units I shipped for free would be the best I could produce.

The issue about suppliers is a important one. I recently decided to try a Mosquito based on some research. It was pricey to be sure and who knows about the viability of the supplier. But it certainly is a first rate design and I am very pleased.

Frederick

nhof

This is not a new design, it's a micron which have been around for a few years.

I have one at work but with a more powerful hotend. The machining work is excellent and it performs well overall. I do prefer a dual drive like bondtech so I don't use it much.

My only complaints are that wire management was obviously an afterthought and that the motor gets excessively hot during use unless I derate the amps quite a bit.

fcwilt

@nhof said in GET3D free give away free extruder.:

This is not a new design, it's a micron which have been around for a few years.

So the one being offered for free is a copy of another companies work?

Frederick

3mm

This post is deleted!