Prusa setup for a total dummy
snake1966 last edited by
In the high expectation of receiving my Duet Wifi and 5" panel, can somebody please indicate the path to some sort of guide to setup the system for a prusa i3 type printer, I am a total noob and dummy on this, so any and all help is most appreciated.
Thanks to all in advance and best regards.
whosrdaddy last edited by
The wiki on this site is quite complete and provides a good starting point.
On the SD card you can find an example configuration for an i3 (cartesian) printer type, more info can be found here: https://duet3d.com/wiki/SD_card_folder_structure
darookee last edited by
I converted my Wanhao Duplicator i3 and wrote a small guide you can find here: https://github.com/darookee/wanhaoi3-duetwifi
Darokee, thanks for the writeup. I have added a link to it under the tutorial section of the wiki: