M26 not working
I am calling macro to start print with certain offset:
Error I get:
Error: Failed to execute M26: [NullReferenceException] Object reference not set to an instance of an object.
Same thing runs as expected on non-beta setup of mine. Is there something else I am missing?
Phaedrux last edited by
gtj0 last edited by
Assuming you're trying to start 10070 bytes into the file... M26 is broken.
You should report it at https://github.com/chrishamm/DuetSoftwareFramework/issues
@Phaedrux I've paused the print and used M27 to see the current offset. I can not get "resurrect" to generate (should be automatic every time print is paused) thus I am making a workaround .
@gtj0 thanks, will report it there.
droftarts last edited by
@Minion Can you post what firmware versions (beta that doesn't work, non-beta that does) you are using?
firmwareName":"RepRapFirmware for Duet 3 MB6HC v0.6 or 1.0","boardName":"MB6HC","firmwareVersion":"3.0beta12+1","firmwareDate":"2019-11-11b1
firmwareName":"RepRapFirmware for Duet 2 WiFi/Ethernet","firmwareVersion":"2.02(RTOS)","firmwareDate":"2018-12-24b1
chrishamm replied via DSF issue board confirming that M26 is buggy and will be fixed in next release.