Question about bed probing

fcwilt

@User3D said in Question about bed probing:

@fcwilt compare them with each other.

You mean two different height maps?

You can create a heightmap and save it using a unique name with G29 S3 P"filename".

The you can download the saved files and compare them.

While I don't compare them I use the feature to save/load low, medium and high point count height maps.

Frederick

User3D

@fcwilt said in Question about bed probing:

@User3D said in Question about bed probing:

@fcwilt compare them with each other.

You mean two different height maps?

No

I still don't know if my bed is stable. So I want this feature where it will show me error dialogue telling me 'You need to level your bed' when bed is extremely titled. So basically I want to compare height errors with each other.

fcwilt

@User3D said in Question about bed probing:

I still don't know if my bed is stable. So I want this feature where it will show me error dialogue telling me 'You need to level your bed' when bed is extremely titled. So basically I want to compare height errors with each other.

But to determine if the bed needed leveling it would perform all of the probing needed to level the bed - so why not just continue the process and level it?

How are you leveling you bed?

Thanks.

Frederick

DIY-O-Sphere

@User3D said in Question about bed probing:

I still don't know if my bed is stable

So the first thing to improve is the stabilty of the bed.
Otherwise you will compare one error to an other...
Or you have to mesh level before every print...
Had the same issue with my Hevo.
After modifying the bed frame, the thing is rock solid.
I mesh level the bed only for sanity 3-4 times a year..