Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    6 Way Microfit connector

    Scheduled Pinned Locked Moved
    Smart effector for delta printers
    6
    20
    2.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T3P3Tonyundefined
      T3P3Tony administrators
      last edited by

      Thanks for the feedback.

      www.duet3d.com

      1 Reply Last reply Reply Quote 0
      • Dougal1957undefined
        Dougal1957
        last edited by

        Your Welcome Tony it wasn't a big issue on the beta with the collar mount as that could be rotated was still tight to get at the clip to release it but it was possible this one you can't get it on without removing the retaining clip.

        1 Reply Last reply Reply Quote 0
        • DjDemonDundefined
          DjDemonD
          last edited by

          I haven't started wiring mine yet so rotate the connector before wiring seems to be the consensus?

          Edit - done, not too bad actually used a plumber's wrench (not necessarily a recommendation).

          Simon. Precision Piezo Z-Probe Technology
          www.precisionpiezo.co.uk
          PT1000 cartridge sensors NOW IN, just attach to your Duet board directly!

          1 Reply Last reply Reply Quote 0
          • Dougal1957undefined
            Dougal1957
            last edited by

            Lykle has now redesigned the adaptor so it should be ok now

            1 Reply Last reply Reply Quote 0
            • Zesty_Lykleundefined
              Zesty_Lykle
              last edited by

              I have modified the adapter and created a new version.
              I have modified the pillar closest to the 6 way plug to avoid the latch all together.
              The bolt now sits under the latch.
              Here is a link.
              http://shpws.me/OSt3

              Lykle
              Design, make and enjoy life

              Co Creator of the Zesty Nimble

              1 Reply Last reply Reply Quote 0
              • Dougal1957undefined
                Dougal1957
                last edited by

                @CaLviNx:

                @Zesty_Lykle:

                I have modified the adapter and created a new version.
                I have modified the pillar closest to the 6 way plug to avoid the latch all together.
                The bolt now sits under the latch.
                Here is a link.
                http://shpws.me/OSt3

                Will you release the STL on its own ?

                I'll ask him to publish it on Thingiverse? are you on the Discord App it is the easiest way to contact the zesty guys>

                Doug

                1 Reply Last reply Reply Quote 0
                • Dougal1957undefined
                  Dougal1957
                  last edited by

                  OK for some reason I thought you were in Scotland you live and learn

                  Doug

                  ps just checked the maps way out east then last time I was on that part of the Island was just before the Turks invaded?

                  1 Reply Last reply Reply Quote 0
                  • Zesty_Lykleundefined
                    Zesty_Lykle
                    last edited by

                    OK, added the file to the Thingiverse page as well.
                    Only added the STL version, called V2.2 https://www.thingiverse.com/thing:2453322

                    Sorry that I didn't release it in Thingiverse straight away. Will be tricky to print, lot of support needed.

                    Lykle
                    Design, make and enjoy life

                    Co Creator of the Zesty Nimble

                    1 Reply Last reply Reply Quote 0
                    • Jareryundefined
                      Jarery
                      last edited by

                      Any recommendations for printing in regards to supports ?
                      Shipping to canada costs more than the parts….

                      1 Reply Last reply Reply Quote 0
                      • DjDemonDundefined
                        DjDemonD
                        last edited by

                        I was thinking that given the large nut under the adaptor is hard to access with the adaptor in place, for example to tighten the hotend if it gets loose, maybe the adaptor could incorporate a nut trap to fit the M12? nut provided by Duet. This way the nut would be captive, the heatsink could be screwed tightly into it easily, and then the hotend position set by tightening the heatbreak into the nozzle at the desired position.

                        Simon. Precision Piezo Z-Probe Technology
                        www.precisionpiezo.co.uk
                        PT1000 cartridge sensors NOW IN, just attach to your Duet board directly!

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA