Where is my config.g

tecno

Just received my Mini 5+

In my sysyems folder there is no config.g to be found.
How can I get this file?

Cheers Bengt

SIam

Here you can generate the required files

https://configtool.reprapfirmware.org/Start

tecno

@tecno Thank you!

tecno

That config tool does not work with Mini 5+ WiFi

Can not set drivers !!!

Assume I have to edit the generated config.g

T3P3Tony

@tecno what aspect does not work with the Mini 5+ ?

Argo

@t3p3tony

Maybe I'm blind but I don't see how to generate a config with 7 drives.
The "+" is not clickable after 5 added drives.
There is also no Duet 3 Mini 2+ Dual-stepper Expansion Board available to add.

tecno

Can not add second Z
Can not choose driver? to axis = options greyed out
Can not set Z probe = options not working = greyed out

So for a newbe this is kind of frustrating

T3P3Tony

@tecno @Argo I see yes, the mini 2+ is not yet added to the config tool so generate the config with a single Z axis, then you can edit the M584 command to add the additional drivers.

I know this is already logged to be added to the config tool on the next update.

tecno

@t3p3tony said in Where is my config.g:

@tecno @Argo I see yes, the mini 2+ is not yet added to the config tool so generate the config with a single Z axis, then you can edit the M584 command to add the additional drivers.

I know this is already logged to be added to the config tool on the next update.

M584 X0.2 Y0.1 Z0.3 Z1.4 E0.0

Is above syntax correct adding a second Z?

jay_s_uk

@tecno no

M584 X0.2 Y0.1 Z0.3:0.4 E0.0

assuming you're using the 4th and 5th drivers

tecno

@jay_s_uk said in Where is my config.g:

@tecno no
M584 X0.2 Y0.1 Z0.3:0.4 E0.0
assuming you're using the 4th and 5th drivers

Thank you!