Toolboard V1.0 error

PaulHew

@tecno Glad you sussed it, I was cooking Makhani Dahl.

Fan0 should be part cooling, due to some slicers being inflexible.
Fan1 is the tool fan, the one that cools the heatbreak on the nozzle.

Yes, the Tool Fan and Fan0 buttons are confusing........

tecno

@paulhew

Now I got a grip of this but I am convinced that I will find some issues

I envy you guys that live in UK, you have a magnitude of spices, weggis and fruit we never see here.

So I think we can put a lid on this thread.

I want to thank you Paul and Jay for helping me out with this, much appreciated.

Cheers
Bengt

ps. some very irritating details as regards this board will come later.

PaulHew

@tecno said in Toolboard V1.0 error:

ps. some very irritating details as regards this board will come later.

Going from one control board to another is a steep learning curve.
I went from Marlin to Duet three years ago on an Ender3 before @Phaedrux wrote the guide.
Last year I tried Klipper firmware on SKR boards, the config is massive and you cannot do on the fly changes like RRF, so much so, My latest addition is running a Duet Mini instead of the SKR.
Tried Klipper on Duet2 Eth + Duex5, Bed tramming was awful experience and did not always work. Back to RRF and it trams perfectly.

IMO, I will not use another manufacturer if I am controlling a 3D printer. I tried and hated it, and i do not give up easily!

Duets Dozuki is good and I normally have the GCode page open and pinned!

Hope you can get your first print out ok.

Glad to of helped.

P.

tecno

@paulhew

My original TriGorilla board gave up on me so I was going for a SKR 1.4 but BTT in CZ screwed up my order. They have some employee problems.

So I took the bull at the horns and ordered my first Mini 5 that I had issues with = no fans working so it was a DOA bord. Meanwhile I was waiting for the new Mini5 I decided to get rid of Anycubic's cabling that is horrible and purchased the toolboard.

This setup with the printhead will be of temporary nature as I will design a new one with the toolboard.
Also the new hotend Dragon from Phaetus will be nice to test. Still a virgin = no filament extruded yet.

https://bantam.design/mount/gallery
I have the one to right = my own iteration adapted to my Anycubic Chiron. Will play around with this for a while so I can see what can be altered to my satisfaction.

Take care, now time to relax with Netflix.