My take on a accelormeter
If anyone want I made an accelerometer for using with RRF. You can choose between 3.3V or 5V.
40 are in stock.
4€ without connectors (you can use JST or Molex KK or every other 2.54mm connector)
6€ with jst connectors
shipping europe and worldwide 4€ untracked 7€ tracked
Nurgelrot last edited by
@pcr Are these up for order on your tindie store page? Or basically how do I get my hands on 1 or 2?
oliof last edited by
I designed a simple mount to place this board on top of a 4020 fan (since that's where I had space on my print head).
Here's the FreeCAD and STL files for those who want to make it nicer and easier to mount.
And an "action shot" (please no comments on the terrible prints, that's another saga)
Two notes: Need to make a Y mount as well since this is a cantilevered bed slinger, and seven extra wires really makes me want to have a toolboard on every machine (-:
some quick and dirty drawings on how to connect.
@T3P3Tony Question to the D2W pinout. why does the CS3 and CS4 pins do not say spi.CS3 and spi.CS4
@PCR updated the wiring diagram image.