nz_andy last edited by nz_andy
100% polycarbonate black is very hard to make look good as it's shinny and refracts on every imperfection. very strong layer bonding, good enough to not break on layer lines. this print was 0.25 layer height.
3DPMicro last edited by
@nz_andy any chance you'd be willing to divulge some specifics on your xy drives like servo or stepper, step angle, on board or external drivers, screw lead, micro stepping and speed of external perimeters? Im always interested in gathering more info related to the patterns created on external surfaces (the ones I dont think are necessarily caused by resonance)