Unofficial RRF 3.4.0beta7+4 files

gloomyandy

@owend It used "_" in the original beta7 but has changed back to "-" in the most recent builds (and will be this way in RC1)....
https://github.com/Duet3D/RepRapFirmware/commit/3ac3345333659785dcd21088ae0b9b93ec914a4d

RepRapFirmware 3.4.0RC1
This release is still in preparation. Further items may be added before the release.

The macro files run after events are now heater-fault.g, filament-error.g (as in RRF 3.3), driver-error.g, driver-warning.g and driver-stall.g instead of these names with the '-' character replaced by '_'

a little confusing!

0

dc42 committed to Duet3D/RepRapFirmware

Replace '_' by '-' when generating macro name from event type name

OwenD

@gloomyandy
Thanks for that.
I had both files until yesterday.
I couldn't remember which to use, so I looked at the release notes, but in honesty I do now recall reading the snippet you posted, so my fault.

PetrKroupa

@dc42 - UPDATE: in BETA7+7 is called filament-error.g . Not filament_error.g.
(6HC + 1LC + SBC + MFM)