Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Eccentric Probe on a Delta Printer

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    5
    11
    718
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jay_s_ukundefined
      jay_s_uk @ignacmc
      last edited by

      @ignacmc an offset probe doesn't cause effector tilt but is affected by it. The issue you'll have is you don't know how much the effector is tilting at each point so my advice would be use a removeable probe that sits below the hotend on X0 Y0.

      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

      ignacmcundefined 1 Reply Last reply Reply Quote 0
      • ignacmcundefined
        ignacmc @jay_s_uk
        last edited by

        @jay_s_uk A removable probe that sits below the nozzle came from factory with the printer....but after getting used to inductive sensors with my Prusa Mini, I would like to replicate it on a Delta...definitively it cannot be done? I believe that Tevo Little Monster and others (FLSun?) use eccentric probes (BLTouch). And i suppose it works for them.

        Predator with Duet3 Mini 5+, Smarteffector v4 and LGX Lite Extruder

        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
        • jay_s_ukundefined
          jay_s_uk @ignacmc
          last edited by

          @ignacmc as i say, i wouldn't advise it. you're just entering a world of pain for no gain. i wouldn't touch any delta that installs an offset bltouch

          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

          ignacmcundefined 1 Reply Last reply Reply Quote 0
          • ignacmcundefined
            ignacmc @jay_s_uk
            last edited by

            @jay_s_uk Noted! šŸ˜‰ I would like to know the experience of a BLTouch Delta Printer owner just for curiosity....

            Predator with Duet3 Mini 5+, Smarteffector v4 and LGX Lite Extruder

            A Former User? 1 Reply Last reply Reply Quote 1
            • A Former User?
              A Former User @ignacmc
              last edited by A Former User

              This post is deleted!
              ignacmcundefined 1 Reply Last reply Reply Quote 1
              • Barracuda72undefined
                Barracuda72 @ignacmc
                last edited by Barracuda72

                @ignacmc Honestly..i started with a Anycubic Kossel too many years ago..if you want to invest a duet board into that printer...do it right and take also the Smart effector. beside the fact that you are mostly bound to the V6 hotends its still the hottest sh** for a Delta Printer...no offset in probing...and no thinking about Z-Offset after a nozzle change

                ignacmcundefined 1 Reply Last reply Reply Quote 0
                • ignacmcundefined
                  ignacmc @A Former User
                  last edited by

                  @arnold_r_clark Thanks Arnold...your very clear explanation adds to jay's one...I think is time for getting another SmartEffector. Or doing fully manual calibration with the nozzle tip ignoring the inductive sensor...

                  Predator with Duet3 Mini 5+, Smarteffector v4 and LGX Lite Extruder

                  1 Reply Last reply Reply Quote 1
                  • ignacmcundefined
                    ignacmc @Barracuda72
                    last edited by

                    @barracuda72 I already have a Predator set up that way (Duet3 Mini 5+ with Smarteffector) and perfect so far!

                    Predator with Duet3 Mini 5+, Smarteffector v4 and LGX Lite Extruder

                    1 Reply Last reply Reply Quote 0
                    • CabalSoulundefined
                      CabalSoul @ignacmc
                      last edited by

                      @ignacmc I’m using a Super Pinda on an Anycubic predator. I use it solely for z datum.
                      When I’m calibrating I’m using a fsr nozzle probe. It works great that way.

                      Due to the offset and effector tilt I would strongly advise against using it as the only z probe.

                      Anycubic Predator, Orbiter Extruder , Duet Wifi, Mosquito Hotend, Remote Extruder Stepper cooling and Part cooling

                      ignacmcundefined 1 Reply Last reply Reply Quote 0
                      • ignacmcundefined
                        ignacmc @CabalSoul
                        last edited by

                        Thanks to everybody for your time and suggestions. You have made this issue crystal clear to me šŸ˜‰
                        Wonder why some manufacturers still ship deltas with bltouch....

                        Predator with Duet3 Mini 5+, Smarteffector v4 and LGX Lite Extruder

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA