Heated chamber PID and 3.4 stable
-
@phaedrux Im not good on this github stuff, How can I upgrade to 3.4.1 RC1? I usually do the update using th sudo apt commands
-
@baird1fa In my case, heater 0 is my chamber heater
-
@tinchus said in Heated chamber PID and 3.4 stable:
@phaedrux Im not good on this github stuff, How can I upgrade to 3.4.1 RC1? I usually do the update using th sudo apt commands
@tinchus said in Heated chamber PID and 3.4 stable:
The board is a duet3 running in SBC mode, 3.4 version
In your case running a SBC you would need to use these directions to switch to the unstable package feed on the Pi.
https://docs.duet3d.com/User_manual/Machine_configuration/DSF_RPi#switch-to-unstable-packages