Write a plugin for DWC- solved using BtnCmd.

[MintyTrebor]

@moth4017 take a new backup and replace the BtnCmdAutoRestore.json with the new version. Now open your printer in a private browser window, does it auto restore then?

[moth4017]

@mintytrebor

Did a new backupAutoRestore file , opened up browser in "incognito" mode put in ip address of the printer , the BtnCmd file did not autorecover .

[MintyTrebor]

@moth4017 when you click the "info" button in settings, what version does it report?

Edit - On further thought, given your installation issues with the plugin version upgrade. I think it would be wise if you stop the plugin, uninstall it, clear your browser cache, download and install the plugin again, then re-test the auto restore feature with a fresh backup file.

If that does not work send me your backup file please.

[moth4017]

@mintytrebor
BtnCmd Beta v0.10.13
Cobbled together by Minty Trebor
BtnCmd uses the following libraries/modules:
DeepMerge, MQTT.js, vue-draggable-resizable, axios, jsonpath, vuedraggable
Plus re-uses components and code from DWC.
BtnCmd Wiki
Material Design Icon Library

Ill do the unistall reinstall a bit later on today

[moth4017]

@mintytrebor

Ok i did the unistall , create new file , do new back up etc etc
opened new browser , and the restore worked, ill keep an eye on it while doing the software on the esp32. cheers

[moth4017]

This post is deleted!

[moth4017]

@mintytrebor

Hi well , almot there , jus have some OCD things now to sort

how do i get the buttons and input boxes to line up.

[MintyTrebor]

@moth4017 turn on Snap to Grid in tab settings

[moth4017]

@mintytrebor
hi snap to grid was already on.

if i turn off snap to grid and resize so they are the same , then turn on snap to grid , that works,

[moth4017]

@mintytrebor

Hi is there's an easy way to inherit the DWC styles in one of those html boxes,

so font, text colour, back ground colour etc is the same

[MintyTrebor]

@moth4017 No

[moth4017]

calibration page finished

[moth4017]

filament left on spool weight , with the spool weight removed .

[moth4017]

@mintytrebor

hi is it possible to use a global variable for the URL in a post request , where it says drybox in the picture below .

e.g global dryBoxName = "fred"
http://[dryBoxName}/calibrate

[moth4017]

@mintytrebor

hi when making an input button narrow there looks like another button in the back ground

[MintyTrebor]

@moth4017 You are trying to make it too small.

https://github.com/MintyTrebor/BtnCmd/wiki/Add-Edit-Panel

@moth4017 said in Looking for someone to write a plugin for DWC:

hi is it possible to use a global variable for the URL in a post request

No

[moth4017]

[moth4017]

@mintytrebor

is there away to right justify the text in a "Edit Input Panel Settings"
so the value is next to the suffix?