PanelDue Firmware 3.4.1-pre3 released
-
For release notes and downloads please check the following link.
Your feedback is very welcome.
https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1-pre3
Visit me on github at https://github.com/mfs12/
-
@mfs12 seems to be working so far
️It's been touched on before, but have you looked at the possibility to add at least one macro button to the status page? Kinda annoying having to switch to the control page just to toggle the buildplate lighting
🤣 -
@mfs12 ASFAIK this depends on the number of tools/heats you have configured. If there are to many macro buttons will be hidden.
Visit me on github at https://github.com/mfs12/
-
-
undefined T3P3Tony referenced this topic
-
@mfs12 said in PanelDue Firmware 3.4.1-pre3 released:
@mfs12 ASFAIK this depends on the number of tools/heats you have configured. If there are to many macro buttons will be hidden.
I wasn't thinking about the Control tab, but the Status tab. Afk it's never been any macros in the status tab before
-
Are the print thumbnails supposed to be displayed on the status screen or no? Thanks
-
@mfs12 I'd vote to just have some simple buttons down the right side. I have 5 tools plus the bed, but I've seen the macro buttons when I've disabled tools in the config. This would be a great option.
-
undefined mfs12 locked this topic
