Extract temp to external display
-
-
Tried those settings also, next to be a pin detective and see if there is something in wireing.
Thanks for help, appreciated.
Will try more tomorrow.
-
Pinout seems to be OK.
Is this display 5V and not compatible with Mini5+ ?
-
Why is there no DISPLAY in the left menu?
-
@tecno
It's under System. Have a look at the screenshot I have posted yesterday. -
@tecno did you get it working?
-
Unfortunately no
-
Is there anybody out there (Pink Floyd) that can help me?
-
@tecno
Can we have some picures of the wiring? -
@DIY-O-Sphere
Std 10 pin cables Exp1 to Exp1 and Exp2 to Exp2
-
Had a look again on how cables are keyed as I did not get any life at all. F-ng assembly from the chinese as turning cables 180° I now get backlight and encoder lit up but nothing on screen.
-
-
@tecno
As far as I can tell from the picture, turning is required for exp1 but not for exp2. -
@tecno
Perfect... -
So now my mini 12864 is working
Next is to get my old RepRapDiscount to work. So how to read the silkscreen on board as regards cable keying?
-
-
@DIY-O-Sphere
I interpret the white markings as the cable keying and that is 180° yet another twisted cable, right? -
@tecno please note, the RepRapDiscount controllers require 5V signals, so they are unlikely to work reliably with the 3.3V signals from the Duet 3 Mini. That's why we suggest the Mini 12864 display.
-
@dc42
Yes I am aware of that. I assume only EXP1 needs level shifters on LCD_CS/SCK/MOSI ? -
Lots of digging I found this:
https://forum.duet3d.com/post/236985
Looks like PCR is not here so where can I find 3pcs of this board?
