Smart effector adapter 80mm

[tecno]

@Falkia

How is the top done?

[Falkia]

@tecno Which top do you mean?

[tecno]

@Falkia

Top end of rods

[Falkia]

@tecno The carriage adapter is my own design (CNC milled) that fit on a Hiwin linear block. The rail is mounted inside the tower (C-Beam extrusion). The ends of the belt are clamped on the carriage adapter.

[tecno]

@Falkia

Nice work

Snyggt jobbat, var i landet håller du hus?

/Bengt

[Falkia]

@tecno Thanks, near Falköping.

[apak]

nice work...would you share files?

[Falkia]

@apak Yes, Do you want the holes to be with modeled threads or just holes, I guess that M3 holes are not going to be well printed?

[apak]

@Falkia If I would 3dprinter I would use brass inserts or regular m3 nuts from the opposite side of the screws so It is stronger.

If I would cnc it I would tap the screws holes

[Falkia]

@apak Please check this Thingiverse.