DRAWING WITH THE DELTA
-
GOOD MORNING, IS IT POSSIBLE TO REPLACE THE EXTRUDER WITH A PENCIL AND THEREFORE OBTAIN A TWO-DIMENSIONAL DRAWING?
-
@luca-Massimiliano yes. thats basically how a plotter works.
You may need to think about how you account for lead wear though. You can get automatic propelling pencils but they aren't cheap -
@jay_s_uk YOU KNOW SOME EXAMPLES, I DON'T KNOW HOW TO MANAGE THE WHITE SPACE FROM THE ONE YOU WRITTEN
-
@luca-Massimiliano I don't know of any delta examples off the top of my head but there are many adapters to fit pens to things like ender 3's etc.
-
@jay_s_uk I CAN PROVIDE SUPPORT. I WOULD LIKE INFORMATION ON THE CONFIGURATIONS ON THE SETTING OF THE DUETTO WIFE 2 ON THE SLICER. I USE SILCER IF THERE ARE ANY. THANKS
-
@luca-Massimiliano please stop writing in ALL CAPS, its stresses me out.
looking at thingiverse there are plenty of examples you may be able to base yours on:
https://www.thingiverse.com/thing:31983
https://www.thingiverse.com/thing:1762302
https://www.thingiverse.com/thing:2369089
https://www.thingiverse.com/thing:3436158
https://www.thingiverse.com/thing:4162418/etc etc.
