GRANDIOSO I BAUD GRAZIE MILLE . SONO A BUON PUNTO DIREI COME POSSO RICAMBIARE IL TUO ENORME AIUTO

@droftarts
CARO AMICO ho risolto tutto perfettamente seguendo le tue indicazioni chiare , ti faccio i miei complimenti per intuito determinato, grazie cordiali saluti

@droftarts GRAZIE CARO AMICO SONO RIUSCITO

@jay_s_uk said in how the heating control operates:

M303 T0 S275

THANKS FOR YOUR HELP, I HAVE SOLVED IT

NON RIESCO INSERIRE PIU' FOTO

@droftarts
perfetto risolto mole grazie. buona serata

@fcwilt I didn't understand now I understand perfectly thanks. you have the sailing canoe and pedals, beautiful

@alankilian THANKS ALAN, I INSTALLED EVERYTHING. I TAKE THE OPPORTUNITY TO WISH YOU SERENE EASTER HOLIDAYS TO YOU AND TO ALL THE FRIENDS WHO HELPED ME. THANK YOU

hello my printed object is smaller in height z axis, i use silc3r, how can i increase the z scale? I use a delta printer,

@fcwilt I didn't understand now I understand perfectly thanks. you have the sailing canoe and pedals, beautiful

@fcwilt can you send me some references also of connection with a card

@Phaedrux Yes I'll try
0k thanks

@Phaedrux said in Definition of movements:

m92

I have not done a real test but I printed a drawing that I would like to obtain, I obtained a great result but not yet perfect. I managed to get a 0.03 pen today so I can check my parameters which are M350 X16 Y16 Z16 E16:16 I1 M92 X100 Y100.00 Z100.00 basically with m92 I would scale

@Phaedrux If I change the steps per millimeter with M92, could I not achieve this precision?

@elmoret I would like to understand what the minimum movement (of the printer) that can be had on the axes depends on, for example drawing parallel lines 0.01mm apart or dots.

Good morning, I would like to start by preparing that I have a delta printer with duet 2, I am using it as a plotter, for very small writings I have a 0.03 mm tip. It is possible to increase the definition by modifying the config, maybe temporarily only for this job

@jay_s_uk I CAN PROVIDE SUPPORT. I WOULD LIKE INFORMATION ON THE CONFIGURATIONS ON THE SETTING OF THE DUETTO WIFE 2 ON THE SLICER. I USE SILCER IF THERE ARE ANY. THANKS

@jay_s_uk YOU KNOW SOME EXAMPLES, I DON'T KNOW HOW TO MANAGE THE WHITE SPACE FROM THE ONE YOU WRITTEN

GOOD MORNING, IS IT POSSIBLE TO REPLACE THE EXTRUDER WITH A PENCIL AND THEREFORE OBTAIN A TWO-DIMENSIONAL DRAWING?