GRANDIOSO I BAUD GRAZIE MILLE . SONO A BUON PUNTO DIREI COME POSSO RICAMBIARE IL TUO ENORME AIUTO

@droftarts
CARO AMICO ho risolto tutto perfettamente seguendo le tue indicazioni chiare , ti faccio i miei complimenti per intuito determinato, grazie cordiali saluti

@droftarts GRAZIE CARO AMICO SONO RIUSCITO

@jay_s_uk said in how the heating control operates:

M303 T0 S275

THANKS FOR YOUR HELP, I HAVE SOLVED IT

NON RIESCO INSERIRE PIU' FOTO

@droftarts
perfetto risolto mole grazie. buona serata

@alankilian THANKS ALAN, I INSTALLED EVERYTHING. I TAKE THE OPPORTUNITY TO WISH YOU SERENE EASTER HOLIDAYS TO YOU AND TO ALL THE FRIENDS WHO HELPED ME. THANK YOU

hello my printed object is smaller in height z axis, i use silc3r, how can i increase the z scale? I use a delta printer,

@T3P3Tony thanks for the video, really amazing. and thanks for the directions on the cinematic folder. bye

@T3P3Tony I think that by increasing the stability and rigidity of the structure I can achieve greater precision, less vibrations and better print quality, as well as better weight distribution. Can you tell me how I can implement this kinematics?

good morning, is it possible to add a 4th tower to a delta printer, therefore an extra motor with RepRapFirmware for Duet 2 WiFi/Ethernet version 3.5.2?

thanks I entered the commands in stop.g now I'll check if at the end of the print they both turn off

I have 2 heaters one stays on at the end of printing, the other turns off, how can I the second heater at the end of printing? thanks

good morning, I hope that posting my question like this is correct. I have a heater that stays on at the end of printing, the other one turns off, how can I turn it off automatically?

@jay_s_uk
OK I THINK I HAVE SOLVED IT THANK YOU, I HAVEN'T FOUND ANYTHING IN THE MANUAL THAT INDICATES YOUR SUGGESTION

@jay_s_uk
Could you help me find the extrusion declaration in the manual.

@luca-Massimiliano
I had version 3.2.2 before and didn't declare the first extruder

@jay_s_uk Now I try again but with a declared tool if activated first the second one doesn't work