Ethernet not working what did i miss ?

[the_lund]

Did not work sorry ping the wrong ip
i have tryed with the cabels

[T3P3Tony]

@the_lund what is displayed in the browser when you go to the IP address?

[the_lund]

@t3p3tony

Did not work sorry ping the wrong ip

Another pc has taken the same ip

i have tryed with the cabels

[the_lund]

i get to a site like when your net broke down

[T3P3Tony]

@the_lund it sounds like the board is faulty, please would you contact the reseller you bought it from and arrange a replacement under warranty.

[the_lund]

@t3p3tony i will i bought it direct from http://duet3d.com

Thanks for your help

[cabal2000]

I am having a similar issue. With USB cable connected the ethernet stays on but the minute I disconnect the USB and power up the board, it stays on for a few seconds and then turns off.

[dc42]

@cabal2000 said in Ethernet not working what did i miss ?:

I am having a similar issue. With USB cable connected the ethernet stays on but the minute I disconnect the USB and power up the board, it stays on for a few seconds and then turns off.

Do you mean that just the Ethernet turns off, or something else?

Do you have a jumper on the I_5V_EN pins, to enable the internal 5V regulator?

[cabal2000]

@dc42 Ethernet shuts off. Blinks for a few seconds and stops.

[dc42]

Do the red 5V and green 3.3V LEDs on the Duet go off as well?