Someone have tested WolfBite
-
Hi,
I am interested in this product.... I'm up to the
b...s, of warpinghttps://airwolf3d.com/shop/wolfbite-prevents-3d-printed-parts-from-warping/
Someone can give feedback.... its not cheap..
-
Good stuff.... I use a lot of 3D Lac as well
-
Good old glue stick on PEI is good enough for me. 99 cents for a 2 pack. Back to school special.
-
@mrplay1234 and @phaedrux
I too i have tested 3dlac.... but if the print surface its big.... warping
Some questions:
- Material?
- Temperatures (bed and Nozzle)?
- Chamber? Heated?
-
PLA PetG on glass..... open build printer 50c bed for pla and 60 for petg bed size is 300x200
-
@mrplay1234 said in Someone have tested WolfBite:
PLA PetG on glass..... open build printer 50c bed for pla and 60 for petg bed size is 300x200
Never had problem with PLA or PET-G on glass. PET-G can even stick to much to glass.
But I suggest to try out Hegron, yes this is a spray for hairs available in stores like rossmann. It works even with ABS