Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Cannot print anymore

    Scheduled Pinned Locked Moved
    General Discussion
    8
    35
    4.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Zatsitundefined
      Zatsit
      last edited by

      In my case, the web server probably crashed as a consequence of the fact that I probably pressed the "Erase" button. We do not have proof that he would have crashed if not …

      Creator of Zatsit, the delta printer with none assembly

      1 Reply Last reply Reply Quote 0
      • Zatsitundefined
        Zatsit
        last edited by

        After applying Backup # 3, everything is now normal. I can print from Wifi and from USB.

        It remains to understand the abnormal behavior of the extruder motor, but the key is that everything works again.

        Thank you to all of you !

        Creator of Zatsit, the delta printer with none assembly

        1 Reply Last reply Reply Quote 0
        • dc42undefined
          dc42 administrators
          last edited by

          @Zatsit:

          After applying Backup # 3, everything is now normal. I can print from Wifi and from USB.

          It remains to understand the abnormal behavior of the extruder motor, but the key is that everything works again.

          Thank you to all of you !

          The reason for the extruder problem is probably as I explained a few posts back here https://www.duet3d.com/forum/thread.php?pid=7011#p7011.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • Zesty_Lykleundefined
            Zesty_Lykle
            last edited by

            Things are getting worse. Adding M83 to the startup code messed up my prints.
            Removing it made things even worse. Now I cannot print at all any more, even when the file is accepted.
            It prints a little while and then the extruder shoots back to its previous positions. Net result, no filament coming out.

            I am switching back to 1.15 for now, but keeping the micro sd card intact, so I can still test if and when needed.

            Lykle
            Design, make and enjoy life

            Co Creator of the Zesty Nimble

            1 Reply Last reply Reply Quote 0
            • T3P3Tonyundefined
              T3P3Tony administrators
              last edited by

              Lykle

              Can you give a bit more information, what do you mean by "shoots back to previous positions" ( how much is retracted?). What slicer are you using? Does the error start occuring at the same point in the gcode file?

              Regarding M82/M83 these obviously need to match what your slicer is set to. Can you share the first 20 or 30 lines of the gcode file you are using.

              www.duet3d.com

              1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators
                last edited by

                @Zesty_Lykle:

                Things are getting worse. Adding M83 to the startup code messed up my prints.
                Removing it made things even worse. Now I cannot print at all any more, even when the file is accepted.
                It prints a little while and then the extruder shoots back to its previous positions. Net result, no filament coming out.

                I am switching back to 1.15 for now, but keeping the micro sd card intact, so I can still test if and when needed.

                1. Are you slicing with relative or absolute extrusion?

                2. Is your slicer putting any M82 or M83 commands near the start of the gcode file it generates?

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                1 Reply Last reply Reply Quote 0
                • Zesty_Lykleundefined
                  Zesty_Lykle
                  last edited by

                  Oh I have a different issue now, I cannot upload a file. I changed back to 1.15 using the 1.15 sd card I had, and the M997 commands
                  Printing a files stored on my SD card works, but uploading doesn't gives an error after the upload has completed.
                  I will switch back to the 1.17b again and see if that problem has been removed, then I can start looking at the retractions.

                  I am using S3D and the Relative extrusion distances was not set. I have now set it. And have included M83 to my startup code.
                  Correct?

                  Edit: OK, back in 1.17b and can upload files again.

                  Lykle
                  Design, make and enjoy life

                  Co Creator of the Zesty Nimble

                  1 Reply Last reply Reply Quote 0
                  • Zesty_Lykleundefined
                    Zesty_Lykle
                    last edited by

                    Phew, that is a relief!
                    Printing again. I checked everything and switched on Relative extrusion distances.
                    Uploaded the file and started printing.
                    As I am trying out a new print surface I had to cancel and restart the print all the time. That worked like a charm, no more issues with the extruder stepper.

                    Now, why this suddenly started to happen I have no idea. Only thing I can think of is that I have been switching factory files a lot lately. (correct, I have no idea!)

                    Thanks David and Tony for your help.

                    Lykle
                    Design, make and enjoy life

                    Co Creator of the Zesty Nimble

                    1 Reply Last reply Reply Quote 0
                    • ShadowXundefined
                      ShadowX
                      last edited by

                      That is why I stop upgrading the firmware now unless I have an issue that the revised firmware fixes. If it already works, I stop upgrading just to get to the latest and greatest bugs.

                      1 Reply Last reply Reply Quote 0
                      • T3P3Tonyundefined
                        T3P3Tony administrators
                        last edited by

                        Shadow, while being at the cutting edge is not always a good idea I agree, in this particular case it was not an issue in 1.17b but a absolute vs relative extrusion mismatch

                        www.duet3d.com

                        1 Reply Last reply Reply Quote 0
                        • InSanityundefined
                          InSanity
                          last edited by

                          @ShadowX:

                          That is why I stop upgrading the firmware now unless I have an issue that the revised firmware fixes. If it already works, I stop upgrading just to get to the latest and greatest bugs.

                          Haaa, I've already had to unsolder and soler in a new processor, I'll be the guinea pig. I'm also a software engineer by trade so I expect bugs. If everything works perfect the product life cycle was Way too long and should have been shelved long ago.

                          Jeff

                          Duet WiFi Powered FFCP with E3D legends hotend system. BLTouch grid leveling.

                          1 Reply Last reply Reply Quote 0
                          • Zesty_Lykleundefined
                            Zesty_Lykle
                            last edited by

                            Sorry, it is happening again.
                            This time after I completed a print. Redid something in the model, reprinted it and boom, server crashed and extruder stepper going back and forth.
                            I have M83 in my start file, in fact it is in there twice I saw. So retried with only 1, no difference.

                            I had to switch off the printer and leave it for 10 mins before it would print normally again. Switching it off, waiting 10 sec's and switching it on again, did not solve it.

                            Lykle
                            Design, make and enjoy life

                            Co Creator of the Zesty Nimble

                            1 Reply Last reply Reply Quote 0
                            • deckingmanundefined
                              deckingman
                              last edited by

                              @Lykle,

                              I notice that way back near the top of the first page of this thread, you gave your start gcode which has this line

                              M80 ; lights on

                              What is that all about? A quick look at the wiki tells me that M80 is used to turn an ATX power supply on from standby. Have you got some sort of lights that run from a separate power supply? Could this line be screwing things up for you? Can you comment it out and see if that fixes the issue?

                              Ian

                              Ian
                              https://somei3deas.wordpress.com/
                              https://www.youtube.com/@deckingman

                              1 Reply Last reply Reply Quote 0
                              • Zesty_Lykleundefined
                                Zesty_Lykle
                                last edited by

                                Good point.

                                Lykle
                                Design, make and enjoy life

                                Co Creator of the Zesty Nimble

                                1 Reply Last reply Reply Quote 0
                                • T3P3Tonyundefined
                                  T3P3Tony administrators
                                  last edited by

                                  Lykle please send a link to your gcode, and config.g cheers

                                  Tony

                                  www.duet3d.com

                                  1 Reply Last reply Reply Quote 0
                                  • Zesty_Lykleundefined
                                    Zesty_Lykle
                                    last edited by

                                    Hi Tony,
                                    Here you go.
                                    https://www.dropbox.com/s/53k0jzpjyzs4qxa/3D%20Printing.rar?dl=0

                                    Lykle
                                    Design, make and enjoy life

                                    Co Creator of the Zesty Nimble

                                    1 Reply Last reply Reply Quote 0
                                    • ShadowXundefined
                                      ShadowX
                                      last edited by

                                      @deckingman:

                                      @Lykle,

                                      I notice that way back near the top of the first page of this thread, you gave your start gcode which has this line

                                      M80 ; lights on

                                      What is that all about? A quick look at the wiki tells me that M80 is used to turn an ATX power supply on from standby. Have you got some sort of lights that run from a separate power supply? Could this line be screwing things up for you? Can you comment it out and see if that fixes the issue?

                                      Ian

                                      I think the "M80; lights on" goes back to Lykle's BI V2.5 printer default settings before he upgraded to DuetWifi. The BI printers running the Rumba board used the ATX on/off commands (M80/M81) to turn on and off the LED lights. Repetier had a nice button on the screen, so they hijacked that command as the LED switch.

                                      1 Reply Last reply Reply Quote 0
                                      • T3P3Tonyundefined
                                        T3P3Tony administrators
                                        last edited by

                                        Thanks lykle

                                        From the point of view of the configuration the config.g and the start gcode both set the printer to relative extrusion. the file is also sliced for relative extrusion so thats all good.

                                        I don't think this is the issue but I noticed that your config.g is for a delta printer but you have a different maz speed for your Z axis than your X/Y these three axis should all be the same.

                                        You have a M501 at the end of your config.g - whats in your config over ride gcode file?

                                        www.duet3d.com

                                        1 Reply Last reply Reply Quote 0
                                        • Zesty_Lykleundefined
                                          Zesty_Lykle
                                          last edited by

                                          Thank for the speed comment. I will make them identical. Never gave it any thought,

                                          I notice that I can print normally now, but I have to do a Home before I can print, otherwise the extruder starts misbehaving. This is not a real problem, but it seems to be new. I don't remember eve having this issue, but I am back at 1.15b so I must have just happen to miss it during that time.

                                          Anyway, thanks for the help.

                                          Lykle
                                          Design, make and enjoy life

                                          Co Creator of the Zesty Nimble

                                          1 Reply Last reply Reply Quote 0
                                          • First post
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA