Setting up for a THC-01 hotend
-
@deckingman Yeah a THC-01 hotend like the subject on the thread say =P
I just altered the start gcode, ofc that set the temps for the first layer. But the print still aborts after the priming section!
Last slice: https://drive.google.com/open?id=1EX-3pNZI0HHZLwLHR2xeXhb9diTIy5uz
EDIT:
Ok, i've got it to go past the priming now, removed every "M900,M907,M200" the final thing i had to remove was "M1 S10", the temps are still kinda wacky (look @ the file linked), but it's trying to print now.
Going to let it finish and see how it ends up. -
@exerqtor is it set to Marlin or RepRap gcode flavor?
-
@phaedrux Reprap/Sprinter.
-
What slicers whould ppl here suggest using though? I'm getting tired of this
-
@exerqtor I have success with Cura and Slic3r PE
-
@exerqtor Slic3R PE or the "dev" version. But rather than try to use Prusa's way of changing filaments, just use it to insert the tool changes then do your own macros to handle the filament changing and purging.
-
@t3p3tony said in Setting up for a THC-01 hotend:
@exerqtor I have success with Cura and Slic3r PE
I didn't have much luck with Cura (used it a couple month's and didn't like it to much).
@deckingman said in Setting up for a THC-01 hotend:
@exerqtor Slic3R PE or the "dev" version. But rather than try to use Prusa's way of changing filaments, just use it to insert the tool changes then do your own macros to handle the filament changing and purging.
Ok what's the dev verson? As far as i can see the newest update to the "normal" Slic3r is from 2015 or something =/ (Edit. just found the dev verson lol) downloading and trying now).
Yeah i'm thinking about doing that, but i can't seem to find a good way to do that either. Also making stuff from scratch is a pain if the function is already in the slicer imo.
-
............................ Also making stuff from scratch is a pain if the function is already in the slicer imo.
I'd agree with you if the function worked. But as you've discovered, the PE version adds commands such as M900 and M907 that are suited to Prusa's firmware but not the RepRap firmware that Duet uses. I know it may seem a bit of a pain to write your own macros, but it does meant that you have full control and can get the exact behaviour that you want, rather than be stuck with something designed for a specific machine.
-
Yeah true, but i have to say one thing. And that's i'm NEVER installing regualar Slic3r again what a utter piece of garbage!
-
@exerqtor said in Setting up for a THC-01 hotend:
Yeah true, but i have to say one thing. And that's i'm NEVER installing regualar Slic3r again what a utter piece of garbage!
Care to elaborate?
-
Generally just feels like stepping back in time 10 years, and it lack sooo many futures compared to Slic3r PE.
Just took the dive into S3D to see if i can get that to work.
