Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. Milan R
    • Profile
    • Following 0
    • Followers 0
    • Topics 3
    • Posts 20
    • Best 1
    • Controversial 0
    • Groups 0

    Milan R

    @Milan R

    2
    Reputation
    1
    Profile views
    20
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    Milan R Unfollow Follow

    Best posts made by Milan R

    • RE: Updating a Duet2Wifi DuetWifiServer

      @Phaedrux

      Hello,

      wow ok that was my bad, but also i have to talk to my roommates 🙂

      The Wifi name is slightly different between the 2,4 ghz and the 5 hgz. Just the F in wifi is caps or not.

      Now i could connect.

      So sorry to go to all this writing because of my supidity...

      But now it seems to work THANKS once again.

      i´m so embarresed 😞

      posted in Firmware installation
      Milan Rundefined
      Milan R

    Latest posts made by Milan R

    • RE: Imputshap8ng stops when collecting data

      @Milan-R
      Hello,
      so today i had some time and tried it again. It worked at the first try and i can see data now.
      I changed nothing. But now it just works.

      posted in Tuning and tweaking
      Milan Rundefined
      Milan R
    • RE: Imputshap8ng stops when collecting data

      @oliof
      Hello,
      Thanks for the answer.
      I use the plug in and I don't see any data that was collected.
      Or at least I don't know where to find it.

      It is possible to do a x and a y move or a combined move.
      When I say I want a x and a y move. It does only the x move but does not start the y move, even though it is in the queue. I think I have seen a picture, where there is a check mark in front of the move before it starts the next move.

      I just see the playbutton for the first move and a sun or a clock in the line of the second move,but it never changes

      Best regards Milan

      posted in Tuning and tweaking
      Milan Rundefined
      Milan R
    • Imputshap8ng stops when collecting data

      Hello everyone,

      I just installed my accelerometer, after some tries the sensor was found by the duet with the m955 command.

      When I start the data collection, the print head makes a move from the center along the x axis. But the nothing happens anymore.

      Do you have an idea what the problem might be?

      Kind regards
      Milan

      posted in Tuning and tweaking imput shaping accelerometer
      Milan Rundefined
      Milan R
    • RE: Witch polaritiy is switched?

      @dc42 Thank you.

      I use a Duet2 but still that healps a lot.

      posted in Duet Hardware and wiring
      Milan Rundefined
      Milan R
    • Witch polaritiy is switched?

      Hello,

      I have my 3D printer up and running, but I want to redo the wiring to get rid of some wires to the tool head.

      I'd like to use a single wire for all ground and voltage supplies when possible. (Maybe excluding the heater becuase of wire sizes)

      But for the fans and heater, one of the wires is switched, and I couldn't find out which side is switched. I guess they all share a common ground, but I wanted to be sure.

      As a bonus, can someone tell me why the BL Touch has 2 voltage and 2 ground cables? Can I just short these together to not run single wires for every one of these cables?

      Thank you and best regards,
      Milan

      posted in Duet Hardware and wiring
      Milan Rundefined
      Milan R
    • RE: Updating a Duet2Wifi DuetWifiServer

      @Phaedrux

      Hello,

      wow ok that was my bad, but also i have to talk to my roommates 🙂

      The Wifi name is slightly different between the 2,4 ghz and the 5 hgz. Just the F in wifi is caps or not.

      Now i could connect.

      So sorry to go to all this writing because of my supidity...

      But now it seems to work THANKS once again.

      i´m so embarresed 😞

      posted in Firmware installation
      Milan Rundefined
      Milan R
    • RE: Updating a Duet2Wifi DuetWifiServer

      @Phaedrux

      i got it on ebay (kleinanzeigen) so not the online shop.

      But as far as i could tell it is an original. I googled a little to dopple check.

      But i´ll ask for the Bill so i can see when it was bought

      posted in Firmware installation
      Milan Rundefined
      Milan R
    • RE: Updating a Duet2Wifi DuetWifiServer

      @Phaedrux

      i was confinced that it would work this time 😞

      I tried the steps: "Set WiFi to idle mode","Configure network SSID and password","Enable networking"

      Error: WiFi module reported: no known networks found<LF>WiFi module is idle(...)
      M552 S-1
      WiFi module stopped<LF>ok<LF>
      M552
      WiFi module is disabled<LF>ok<LF>
      M552 S0
      ok<LF>WiFi module started<LF>
      M552
      WiFi module is idle<LF>ok<LF>
      M587 S"OneDoesNotSimplyConnectToWifi2" P"BLANKED"
      ok<LF>
      M587
      Remembered networks:<LF>OneDoesNotSimplyConnectToWifi2 IP=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0<LF>ok<LF>
      M552 S1
      ok<LF>Error: WiFi module reported: no known networks found<LF>WiFi module is idle(...)<LF>Error: WiFi module reported: no known networks f[Warning: Maximal number of characters per line exceeded! Check the line break settings in Terminal > Settings > Text or increase the limit in Terminal > Settings > Advanced.]

      I ran a M122 too:

      Under the headline wifi something changed:

      Network state is active
      WiFi module is idle
      Failed messages: pending 0, notready 0, noresp 0
      WiFi firmware version 1.27
      WiFi MAC address a0:20:a6:19:22:84
      WiFi Vcc 3.29, reset reason Turned on by main processor
      WiFi flash size 4194304, free heap 28576
      Clock register 00002002
      Socket states: 0 0 0 0 0 0 0 0

      posted in Firmware installation
      Milan Rundefined
      Milan R
    • RE: Updating a Duet2Wifi DuetWifiServer

      @Phaedrux

      weird it was in Yat but somehow got lost.

      Well but i tried:
      M588 S"*"
      M552 S1
      M122

      M588 S""
      ok
      M552 S1
      ok
      Error: WiFi module reported: no known networks found
      WiFi module is idle
      Error: WiFi module reported: no known networks found
      WiFi module is idle
      Error: WiFi module reported: no known networks found
      WiFi module is idle
      Error: WiFi module reported: no known networks found
      WiFi module is idle
      M122
      === Diagnostics ===
      RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.5 (2022-11-30 19:36:12) running on Duet WiFi 1.02 or later
      Board ID: 08DDM-9FAM2-LW4S4-6J9FL-3S86M-KJSBX
      Used output buffers: 1 of 26 (11 max)
      === RTOS ===
      Static ram: 23836
      Dynamic ram: 74792 of which 20 recycled
      Never used RAM 13432, free system stack 193 words
      Tasks: NETWORK(ready,7.6%,335) HEAT(notifyWait,0.0%,349) Move(notifyWait,0.0%,363) MAIN(running,92.4%,458) IDLE(ready,0.0%,30), total 100.0%
      Owned mutexes: USB(MAIN)
      === Platform ===
      Last reset 00:51:52 ago, cause: reset button or watchdog
      Last software reset details not available
      Error status: 0x00
      Aux0 errors 0,0,0
      Step timer max interval 0
      MCU temperature: min 32.5, current 36.3, max 36.5
      Supply voltage: min 1.3, current 1.7, max 1.8, under voltage events: 0, over voltage events: 0, power good: no
      Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
      Events: 0 queued, 0 completed
      Driver 0: ok, SG min n/a
      Driver 1: ok, SG min n/a
      Driver 2: ok, SG min n/a
      Driver 3: ok, SG min n/a
      Driver 4: ok, SG min n/a
      Driver 5:
      Driver 6:
      Driver 7:
      Driver 8:
      Driver 9:
      Driver 10:
      Driver 11:
      Date/time: 1970-01-01 00:00:00
      Cache data hit count 4294967295
      Slowest loop: 99.50ms; fastest: 0.14ms
      I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
      === Storage ===
      Free file entries: 10
      SD card 0 detected, interface speed: 20.0MBytes/sec
      SD card longest read time 2.0ms, write time 0.0ms, max retries 0
      === Move ===
      DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
      === MainDDARing ===
      Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
      === AuxDDARing ===
      Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
      === Heat ===
      Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
      === GCodes ===
      Segments left: 0
      Movement lock held by null
      HTTP is idle in state(s) 0
      Telnet is idle in state(s) 0
      File is idle in state(s) 0
      USB is ready with "M122" in state(s) 0
      Aux is idle in state(s) 0
      Trigger is idle in state(s) 0
      Queue is idle in state(s) 0
      LCD is idle in state(s) 0
      Daemon is idle in state(s) 0
      Autopause is idle in state(s) 0
      Code queue is empty
      === Network ===
      Slowest loop: 1.35ms; fastest: 0.00ms
      Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
      HTTP sessions: 0 of 8
      = WiFi =
      Network state is changingMode
      WiFi module is idle
      Failed messages: pending 0, notready 0, noresp 0
      Failed to get WiFi status
      Socket states: 0 0 0 0 0 0 0 0
      ok
      Error: failed to retrieve WiFi status message: SPI timeout
      WiFi module is idle
      Error: failed to change WiFi mode: SPI timeout
      M588 S"
      "
      Error: M588: Failed to reset the WiFi module to factory settings: WiFi module is disabled
      ok

      posted in Firmware installation
      Milan Rundefined
      Milan R
    • RE: Updating a Duet2Wifi DuetWifiServer

      @Phaedrux

      Hello,

      thats good to hear, that it is moving into the right direction.

      M122
      === Diagnostics ===
      RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.5 (2022-11-30 19:36:12) running on Duet WiFi 1.02 or later
      Board ID: 08DDM-9FAM2-LW4S4-6J9FL-3S86M-KJSBX
      Used output buffers: 1 of 26 (11 max)
      === RTOS ===
      Static ram: 23836
      Dynamic ram: 74792 of which 20 recycled
      Never used RAM 13432, free system stack 193 words
      Tasks: NETWORK(ready,8.6%,335) HEAT(notifyWait,0.0%,353) Move(notifyWait,0.0%,363) MAIN(running,91.3%,458) IDLE(ready,0.0%,30), total 100.0%
      Owned mutexes: USB(MAIN)
      === Platform ===
      Last reset 00:01:29 ago, cause: reset button or watchdog
      Last software reset details not available
      Error status: 0x00
      Aux0 errors 0,0,0
      Step timer max interval 0
      MCU temperature: min 32.6, current 32.8, max 33.7
      Supply voltage: min 1.3, current 1.4, max 1.4, under voltage events: 0, over voltage events: 0, power good: no
      Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
      Events: 0 queued, 0 completed
      Driver 0: ok, SG min n/a
      Driver 1: ok, SG min n/a
      Driver 2: ok, SG min n/a
      Driver 3: ok, SG min n/a
      Driver 4: ok, SG min n/a
      Driver 5:
      Driver 6:
      Driver 7:
      Driver 8:
      Driver 9:
      Driver 10:
      Driver 11:
      Date/time: 1970-01-01 00:00:00
      Cache data hit count 3638083520
      Slowest loop: 2.24ms; fastest: 0.14ms
      I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
      === Storage ===
      Free file entries: 10
      SD card 0 detected, interface speed: 20.0MBytes/sec
      SD card longest read time 0.6ms, write time 0.0ms, max retries 0
      === Move ===
      DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
      === MainDDARing ===
      Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
      === AuxDDARing ===
      Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
      === Heat ===
      Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
      === GCodes ===
      Segments left: 0
      Movement lock held by null
      HTTP is idle in state(s) 0
      Telnet is idle in state(s) 0
      File is idle in state(s) 0
      USB is ready with "M122" in state(s) 0
      Aux is idle in state(s) 0
      Trigger is idle in state(s) 0
      Queue is idle in state(s) 0
      LCD is idle in state(s) 0
      Daemon is idle in state(s) 0
      Autopause is idle in state(s) 0
      Code queue is empty
      === Network ===
      Slowest loop: 99.91ms; fastest: 0.00ms
      Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
      HTTP sessions: 0 of 8
      = WiFi =
      Network state is disabled
      WiFi module is disabled
      Failed messages: pending 0, notready 0, noresp 3
      Socket states: 0 0 0 0 0 0 0 0
      ok

      For the other command:

      M588 S""
      Error: M588: Failed to reset the WiFi module to factory settings: WiFi module is disabled
      ok
      M552
      WiFi module is disabled
      ok
      M552 S-1
      ok
      M552 S0
      ok
      WiFi module started
      M588 S"
      "
      ok

      i´m waiting for your response before trying to safe an other network again. Not that I undo something by accident

      posted in Firmware installation
      Milan Rundefined
      Milan R