@jay_s_uk Thanks will look into duet 3 6hc with tool board

@james317 Cool

@sonderzug Hi my plan is to use LGX with the afterburner and toolboard

@r3shyThanks will check out the links

@sonderzugThanks still analysing my options
Will the 1LC toolboard be OK at the higher cabinet temperatures

@jay_s_uk Thanks will look into duet 3 6hc with tool board

Hi Guys
I will be building a voron 2.4 and would like to use Duet
What would be the recommend boards
Is there anything I should look out for
Do not want to use Klipper if that makes sense

@Phaedrux Sorry for the long reply just looked the now Thanks for the replay all sorted now

@aidar Thanks I understand now will try later

Thanks for the reply I wanted only 4 corner probe points is that still wrong

Hi Guys I have Railcore 2 tried to do mesh bed compensation and can’t seem to get it working
added M557 X50:280 Y45:255 S230:210 ;Define Mesh Grid after G31
1c7e50a3-bc27-442b-85ca-affb9d77016d-heightmap.csv
S3D Slicer start script added G29 S1 after home all axes

when I run M122
Bed compensation in use:mesh
Bed probe heights:0.000 0.000 0.000 0.000
Should there be a value in probe heights ?