With RRF3.5 beta, it is possible to request values or choices from the user in a macro. This is great, but how do you get the value that the user has entered to use in the following lines of the macro. Is this possible?

For example : I ask the user to enter the temperature needed and I would like to setup the new temp by a M104 S

M291 P"Enter the temperature of the head" S5 L150 H480 F300

With RRF3.4.0 B5
thermocouplemax31856 > Works
thermocouple-max31856 > does not work

@dc42
There are 2 Z motors

I went to the customer's site and was able to update by copying the files to the SD card.
Everything is working again, thanks for your help.

@dc42 Unfortunately, I don't have access to the machine or the board. I only have access to DWC via remote maintenance.
In fact, there's a very strange problem:
One of our customers had a problem with a clogged printhead and sent us back the EXP3HC printhead (RRF3: 3.4.4 + 1 Thermocouple board) for maintenance.
We repaired the head and tested it on our bench equipped with a 6HC (RRF3: 3.5.0b4).
The board worked fine on our bench, but when we sent the board back to the customer (his 6HC board is in RRF3: 3.4.5 + thermocouple), a very strange problem appeared:

• As soon as the nozzle temperature exceeds 386°C on the head controlled by its EXP3HC, the machine's chamber thermocouples (connected to its 6HC RRF3.4.5) go into error and display 2000°C (the chamber is not heating).
• If I switch off the head heating: the chamber thermocouples immediately start working again.
• If I turn the head heating back on, the chamber thermocouples peak at 2000°C for less than half a second, then work again until the head temperature reaches 386°C, and then display 2000°C!!!
  Totally incomprehensible...
  It's repetitive and reproducible.

I went to the customer's site and was able to update by copying the files to the SD card.
Everything is working again, thanks for your help.

@Phaedrux Is it possible to reset the 6HC and 3EXP3HC boards (erase all the firmware and start again from zero to upload a version 3.5.0 b4)?
If yes, is it possible to do that from remote access (PC connected to Duet 6HC by RJ45) ?

@Phaedrux The machine has been running for 2 years with the same wiring, and there have been no changes to the cabling or the way the wires are routed. There has just been a change of thermal break and nozzle on the head.
There was no new appliance connected to the electrical network, no work (electrical welding or anything else), and no new machine installed.
It's very strange because it's perfectly reproducible: as soon as the temperature of the head reaches 386°C, the chamber sensor go to 2000°C, and as soon as I switch off the head heating, the chamber sensor start working again.
The chamber thermocouples are connected to the 6HC and the head thermocouple to a 3HC, connected to the 6HC via the CANFD bus.
We've already had problems with thermocouples, which we solve with filters. But this is really confusing.
That's why I'm thinking of a firmware problem... The machine was delivered with version 3.1.0, then updated to 3.4.5 about 8 months ago.
I can't manage to update to 3.5.0b4 to try, I don't have access to the SD board, I only have access to the machine's PC via Anydesk.
I think I'm going to have to travel to try and find out what's going on, it's 500km away but I can't leave the customer like that, he can't use the machine any more.
If you have an idea of something to try, I'd love to hear from you.

@dc42 I converted the Anydesk video to MP4.
You can download it here:

https://www.qualup.com/_download/duet/thermocouple_pb_386deg.mp4

at approx. 25sec: head temperature reaches 386°C
at 33 sec: I switch off head heating
at 54sec: I reheat to 390°C
at 1"34sec: head temperature reaches 386°C again

Note:
There have been no modifications to the machine or its environment.

@dc42 I've got a video showing the phenomenon, but it's a Video recorded by Anydesk; you'd need to install Anydesk to be able to view it, do you want me to put it on an ftp?
That's why I wanted to try RRF 3.5.0b4, to see if the phenomenon appears.

@dc42 Unfortunately, I don't have access to the machine or the board. I only have access to DWC via remote maintenance.
In fact, there's a very strange problem:
One of our customers had a problem with a clogged printhead and sent us back the EXP3HC printhead (RRF3: 3.4.4 + 1 Thermocouple board) for maintenance.
We repaired the head and tested it on our bench equipped with a 6HC (RRF3: 3.5.0b4).
The board worked fine on our bench, but when we sent the board back to the customer (his 6HC board is in RRF3: 3.4.5 + thermocouple), a very strange problem appeared:

• As soon as the nozzle temperature exceeds 386°C on the head controlled by its EXP3HC, the machine's chamber thermocouples (connected to its 6HC RRF3.4.5) go into error and display 2000°C (the chamber is not heating).
• If I switch off the head heating: the chamber thermocouples immediately start working again.
• If I turn the head heating back on, the chamber thermocouples peak at 2000°C for less than half a second, then work again until the head temperature reaches 386°C, and then display 2000°C!!!
  Totally incomprehensible...
  It's repetitive and reproducible.

I'm trying to update a duet3 6HC + EXP3HC to version 3.5.0b4 from 3.4.5

I've only managed to update the DWC,
When I try to update the 6HC firmware, I get the message : Your Duet rejected the HTTP request: Unknown message type or not authenticated

I can update the 3EXP board, but then I can't update the 6HC, the update procedure seems to work, but after reset, I'm still in version 3.4.5.

Any Idea ?

Thanks

Ok, I'll do that, thank you for the fast reply.

I would like to have a fan controlled by a temperature sensor, but also have the possibility to force this fan in DWC, is this possible?

If it worked for a while, typically, it looks like the screws on the power terminals were not tightened enough...