Thanks I've seen that but I'm not sure where to link with the duet wifi...
2 x 3 pin black Molex with H+ HF+ PF+ is ok but I have some doubt what to wire for the 8-way white Molex

Hello there

Juste received all the stuff to implement a smart effector on my duet wifi.
But I didn’t found any wiring schema between effector and duet wifi.
Is there any one to help me?

Thanks

@giostark said in Mesh compensation not working on Tevo Little Monster:

If you have original bars probably is because of that:
https://forum.duet3d.com/topic/6951/not-yet-solved-tevo-little-monster-duetwifi-errors/137
look the last post. And please , if you want save your time and liver have a look there and make that check. All bars MUST stay in 0.1 of total variance. Tevo offer more than 6 times. An expectation for a precision tool is a precision hardware , but that brand disregard this.
Unfortunately the Tevo non represent the standard of art for quality check or precision in production.
My upper frame holes were not aligned with the holes of the 3 towers. I had to dismount everything 3 times (and drill) for reach a good result but I'm steel working on it.
I see that still you are using an hardware bed leveling (me too with spring under each screw). My glass is not glued properly even in the aluminium frame. If you sum all the geometries issues, a decent (large) print is hard to reach.
Also make sure those distance are equals:

Thanks dude, I have to check my original bar indeed.
yesterday I've order magball, maybe it will help

i will check as well the pillar, thx

@Phaedrux said in Mesh compensation not working on Tevo Little Monster:

What is the probe type? There may be a geometry error causing you issues, such as effector tilt combined with an offset probe which would give an incorrect height reading based on head position.

In general, this should be your guide for a delta: https://duet3d.dozuki.com/Wiki/Calibrating_a_delta_printer

Hi

I'm using the BL Touch provide with the TLM.
i have already check this guide, but nothing help with me

Hi,

I'm having some issue with Mesh Compensation.
My bed height map is pretty good :

here the height map.csv ;

But when I'm printing, the result is not consistent depending on the point.
You can see on the picture :
global view :

Some spot are OK

Some spot are too high

Some spot (and skirt) are crushed...

I have double check, but my dashboard is showing : "Compensation in Use : Mesh"
And my start G-code is

G28 ; Home
; G32
G29 S1
G92 E0 ; set the extruder to 0
G1 E8 ; prime the nozzle

Any help?

Many thanks

I was able to find one supplier of these mini fuse 1A on amazon.fr
order them a box, then they cancel my order because out of stock...

no way to find some in France...

and today I've received my panel duet 7 and cannot play with it

Thanks!

Indeed, I've found the fuse. it is broken...
unfortunately it is not a common fuse... I've check in auto store and the mini fuse start at 3A

I would have to order online and wait weeks

oops sorry, I'm using a Duet 2 WiFi

Hi

I was changing my heatsink fan and did a short circuit on the wire (with a nice spark)...
Board seems ok, I can Home All, launch heating on Tool and Bed but I have no fan working now...
I have 2 fan on Always On and 2 on Pwm fan.

What can I do to fix my fan? is there a fuse to change?

Thanks