@giostark said in Mesh compensation not working on Tevo Little Monster:
If you have original bars probably is because of that:
https://forum.duet3d.com/topic/6951/not-yet-solved-tevo-little-monster-duetwifi-errors/137
look the last post. And please , if you want save your time and liver have a look there and make that check. All bars MUST stay in 0.1 of total variance. Tevo offer more than 6 times. An expectation for a precision tool is a precision hardware , but that brand disregard this.
Unfortunately the Tevo non represent the standard of art for quality check or precision in production.
My upper frame holes were not aligned with the holes of the 3 towers. I had to dismount everything 3 times (and drill) for reach a good result but I'm steel working on it.
I see that still you are using an hardware bed leveling (me too with spring under each screw). My glass is not glued properly even in the aluminium frame. If you sum all the geometries issues, a decent (large) print is hard to reach.
Also make sure those distance are equals:
Thanks dude, I have to check my original bar indeed.
yesterday I've order magball, maybe it will help
i will check as well the pillar, thx
