Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. Frederik
    • Profile
    • Following 1
    • Followers 0
    • Topics 19
    • Posts 290
    • Best 14
    • Controversial 0
    • Groups 0

    Frederik

    @Frederik

    18
    Reputation
    19
    Profile views
    290
    Posts
    0
    Followers
    1
    Following
    Joined Last Online
    Location Germany Age 41

    Frederik Unfollow Follow

    Best posts made by Frederik

    • Upcoming new Input Shapers

      Hello,

      this question is probably best suited for @dc42

      1.What is the custom input shaper and how will it be different from the others ?

      2.Will it be possible to damp different frequencies on x and y with the a) the same input shaper or b) with different shapers ?

      3.When do you think, you release the first beta firmware for duet3 + sbc + lc1 v1.1 with the new shapers?

      TiA

      Kindly Regards
      Frederik

      posted in Beta Firmware
      Frederikundefined
      Frederik
    • RE: Distribution & Toolboard connection Problems

      @dc42 @Veti @jay_s_uk

      Problem Solved

      Yesterday, i got the Replacement Toolboard.

      After connecting and power up my machine , everything was lighting up as expected.

      Now everything is working as expected and blinks in sync. I`m using now RF 3.2.beta4.3

      Thanks for your Help

      Regards Frederik

      posted in Duet Hardware and wiring
      Frederikundefined
      Frederik
    • RE: No Connection to DCS After Update to 3.2beta4

      @Veti Thank You SOooooooOO much for your tip with the usb cable....i tried a 10 year old usb2 dvd cable (with dual A Plugs on one side). After connecting the second the firmware flashed perfektly on the first try ;).

      I would be so lost without you guys and this forum 🙂

      Have a nice Day !

      posted in Firmware installation
      Frederikundefined
      Frederik
    • RE: Upcoming new Input Shapers

      @dc42
      perhaps a lot more people would consider using the sbc mode on duet3 boards, if it would offer more features / functionality as right now .

      most people dont want to hassle with another level of complexity, only to add wifi and offload the webapplication with a few plugins.

      Im personally looking forward what the future will bring. My Duet 3 is Running in sbc Mod + Lc1 v1 almost a Year now with very little trouble, while riding the unstable branch the whole time 🙂

      posted in Beta Firmware
      Frederikundefined
      Frederik
    • RE: DWC Z - Axis Movement off by Factor 10

      WOW, Thank You soooo much.

      Now my Z Axis working almost spot on...only minor adjustments needed.

      Your Tip with the Extruder E steps was perfekt.

      now there is only the error message from the filament Sensor ,

      and i have to try if the auto bed leveling with the 3 independet z motors will work as expected with my BLTouch.

      What Slicer do you use or recommend ?

      I tried
      Cura 4.8.0 and Prusaslicer .

      Simplyfy 3d looks also realy nice, but i cant find a demmo version or similar. Its a hefty Price Tag for a Slicer and when i am reading the reviews on the internet ,i dont know if it is good at the moment with 4.1 or should i wait till the new update is released ?

      posted in Tuning and tweaking
      Frederikundefined
      Frederik
    • RE: No Connection to DCS After Update to 3.2beta4

      @Frederikfor information purposes:

      The cable that did NOT work: brand new Ugreen with 3Meters in lenght.

      The cable THAT worked: 10 Year old usb2.0 with dual USB-A Plug on one side.
      Like the on the external dvd or harddrives. Lenght ~ 40cm

      posted in Firmware installation
      Frederikundefined
      Frederik
    • RE: Problems updating to RRF 3.3 + LC1 DWC reconnects

      @chrishamm

      2021-01-26_11h34_54.png
      2021-01-26_11h35_22.png
      2021-01-26_11h35_34.png

      posted in Beta Firmware
      Frederikundefined
      Frederik
    • RE: Duet3+SBC+Pi Cam

      Hello,

      i tried the same with my Raspberry Pi 3b+ and the new Pi Cam v2 with 8MP Sensor and the MakerHawk Wide Angle Lens 165°

      I used this WebInterface:

      https://github.com/silvanmelchior/RPi_Cam_Web_Interface

      it works realy well, because you dont have to go in the Linux Terminal to change Camera Settings. It all works over the Duet Webcam Field.

      I used port 8081 but that is up to your preferences.

      Regards
      Frederik

      posted in General Discussion
      Frederikundefined
      Frederik
    • RE: First Layer and Extrusion Problems

      @fcwilt you are right it was a wrong setting from yesterday. its a normal tr8 4 stop with 8 Lead Spindle

      posted in Tuning and tweaking
      Frederikundefined
      Frederik
    • RE: First Layer and Extrusion Problems

      so, now to a new start... nozzle free again, probe working (was a light loose crimp pin on the black wire)

      posted in Tuning and tweaking
      Frederikundefined
      Frederik

    Latest posts made by Frederik

    • RE: [SBC] Version 3.4-b1 now available

      @chrishamm hello, are there any news on the accelerometer not found error when using a toolboard v1.1 and sbc?

      Kindly regards
      Frederik

      posted in Beta Firmware
      Frederikundefined
      Frederik
    • RE: RRF 3.4 input shaping preview available

      @dc42 here the same error , accelerometer detected but when trying to perform a data collect, it says acceleromter not found

      m122
      === Diagnostics ===
      RepRapFirmware for Duet 3 MB6HC version 3.4.0beta1 (2021-07-10 16:20:28) running on Duet 3 MB6HC v1.01 or later (SBC mode)
      Board ID: 08DJM-956BA-NA3TN-6J9DL-3S46S-99AUT
      Used output buffers: 1 of 40 (10 max)
      === RTOS ===
      Static ram: 150904
      Dynamic ram: 62912 of which 24 recycled
      Never used RAM 140352, free system stack 146 words
      Tasks: SBC(ready,0.7%,308) HEAT(delaying,0.0%,325) Move(notifyWait,0.0%,266) CanReceiv(notifyWait,0.0%,774) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,339) TMC(notifyWait,7.4%,59) MAIN(running,91.8%,922) IDLE(ready,0.0%,29), total 100.0%
      Owned mutexes: HTTP(MAIN)
      === Platform ===
      Last reset 00:40:04 ago, cause: software
      Last software reset at 2021-07-11 15:33, reason: User, none spinning, available RAM 137420, slot 0
      Software reset code 0x0012 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0044a000 BFAR 0x00000000 SP 0x00000000 Task SBC Freestk 0 n/a
      Error status: 0x00
      Step timer max interval 172
      MCU temperature: min 31.1, current 33.9, max 47.4
      Supply voltage: min 24.0, current 24.1, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
      12V rail voltage: min 12.1, current 12.1, max 12.2, under voltage events: 0
      Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
      Driver 0: position 41808, standstill, reads 41390, writes 20 timeouts 0, SG min/max 0/425
      Driver 1: position -25728, standstill, reads 41390, writes 20 timeouts 0, SG min/max 0/995
      Driver 2: position 3893, standstill, reads 41390, writes 20 timeouts 0, SG min/max 0/852
      Driver 3: position 0, standstill, reads 41391, writes 20 timeouts 0, SG min/max 0/280
      Driver 4: position 0, standstill, reads 41391, writes 20 timeouts 0, SG min/max 0/825
      Driver 5: position 0, standstill, reads 41399, writes 12 timeouts 0, SG min/max 0/0
      Date/time: 2021-07-11 16:13:58
      Slowest loop: 56.12ms; fastest: 0.04ms
      === Storage ===
      Free file entries: 10
      SD card 0 not detected, interface speed: 37.5MBytes/sec
      SD card longest read time 0.0ms, write time 0.0ms, max retries 0
      === Move ===
      DMs created 125, maxWait 1844035ms, bed compensation in use: none, comp offset 0.000
      === MainDDARing ===
      Scheduled moves 13, completed moves 13, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 1], CDDA state -1
      === AuxDDARing ===
      Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
      === Heat ===
      Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = 2 -1 -1 -1
      Heater 1 is on, I-accum = 0.0
      === GCodes ===
      Segments left: 0
      Movement lock held by null
      HTTP* is doing "M122" in state(s) 0
      Telnet* is idle in state(s) 0
      File is idle in state(s) 0
      USB is idle in state(s) 0
      Aux is idle in state(s) 0
      Trigger* is idle in state(s) 0
      Queue is idle in state(s) 0
      LCD is idle in state(s) 0
      SBC is idle in state(s) 0
      Daemon is idle in state(s) 0
      Aux2 is idle in state(s) 0
      Autopause is idle in state(s) 0
      Code queue is empty.
      === Filament sensors ===
      Extruder 0: no data received
      === CAN ===
      Messages queued 21655, received 30029, lost 0, longest wait 5ms for reply type 6024, peak Tx sync delay 169, free buffers 49 (min 48), ts 12021/12020/0
      Tx timeouts 0,0,0,0,0,0
      === SBC interface ===
      State: 4, failed transfers: 0, checksum errors: 0
      Last transfer: 2ms ago
      RX/TX seq numbers: 29527/29527
      SPI underruns 0, overruns 0
      Disconnects: 0, timeouts: 0, IAP RAM available 0x2c7a4
      Buffer RX/TX: 0/0-0
      === Duet Control Server ===
      Duet Control Server v3.4-b1
      Code buffer space: 4096
      Configured SPI speed: 8000000Hz
      Full transfers per second: 39.59, max wait times: 49.2ms/0.0ms
      Codes per second: 0.04
      Maximum length of RX/TX data transfers: 3196/800
      
      
      m122 b121
      Diagnostics for board 121:
      Duet TOOL1LC firmware version 3.3 (2021-06-15 16:12:58)
      Bootloader ID: SAMC21 bootloader version 2.3 (2021-01-26b1)
      Never used RAM 2108, free system stack 2789 words
      Tasks: Move(notifyWait,0.0%,153) HEAT(delaying,0.2%,117) CanAsync(notifyWait,0.0%,65) CanRecv(notifyWait,0.0%,76) CanClock(notifyWait,0.0%,65) ACCEL(notifyWait,0.0%,61) TMC(notifyWait,2.8%,57) MAIN(running,92.0%,352) IDLE(ready,0.0%,27) AIN(delaying,4.9%,142), total 100.0%
      Last reset 00:01:14 ago, cause: VDD brownout
      Last software reset data not available
      Driver 0: position 0, 859.0 steps/mm, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 11, reads 18391, writes 0, timeouts 0, DMA errors 0, steps req 0 done 0
      Moves scheduled 0, completed 0, in progress 0, hiccups 0, step errors 0, maxPrep 0, maxOverdue 0, maxInc 0, mcErrs 0, gcmErrs 0
      Peak sync jitter 0/5, peak Rx sync delay 192, resyncs 0/0, no step interrupt scheduled
      VIN: 24.4V
      MCU temperature: min 37.5C, current 39.0C, max 39.0C
      Ticks since heat task active 2, ADC conversions started 74496, completed 74495, timed out 0, errs 0
      Last sensors broadcast 0x00000002 found 1 6 ticks ago, loop time 0
      CAN messages queued 492, send timeouts 0, received 339, lost 0, free buffers 37, min 37, error reg 0
      dup 0, oos 0/0/0/0, bm 0, wbm 0, rxMotionDelay 0
      Accelerometer detected: yes, status: 00
      I2C bus errors 0, naks 0, other errors 0
      === Filament sensors ===
      Interrupt 5726621 to 0us, poll 9 to 432us
      Driver 0: no data received, errs: frame 0 parity 0 ovrun 0 pol 0 ovdue 0
      
      
      m122 b121
      Diagnostics for board 121:
      Duet TOOL1LC firmware version 3.3 (2021-06-15 16:12:58)
      Bootloader ID: SAMC21 bootloader version 2.3 (2021-01-26b1)
      Never used RAM 2108, free system stack 2789 words
      Tasks: Move(notifyWait,0.0%,153) HEAT(delaying,0.2%,113) CanAsync(notifyWait,0.0%,61) CanRecv(notifyWait,0.0%,76) CanClock(notifyWait,0.0%,65) ACCEL(notifyWait,0.0%,61) TMC(delaying,2.8%,57) MAIN(running,92.0%,352) IDLE(ready,0.0%,27) AIN(delaying,4.9%,142), total 100.0%
      Last reset 00:43:34 ago, cause: software
      Last software reset data not available
      Driver 0: position 0, 859.0 steps/mm, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 23, reads 5309, writes 0, timeouts 0, DMA errors 0, steps req 0 done 0
      Moves scheduled 0, completed 0, in progress 0, hiccups 0, step errors 0, maxPrep 0, maxOverdue 0, maxInc 0, mcErrs 0, gcmErrs 0
      Peak sync jitter 0/6, peak Rx sync delay 212, resyncs 0/0, no step interrupt scheduled
      VIN: 24.4V
      MCU temperature: min 38.8C, current 40.0C, max 40.3C
      Ticks since heat task active 129, ADC conversions started 2614124, completed 2614122, timed out 0, errs 0
      Last sensors broadcast 0x00000002 found 1 134 ticks ago, loop time 0
      CAN messages queued 8362, send timeouts 0, received 6006, lost 0, free buffers 37, min 37, error reg 0
      dup 0, oos 0/0/0/0, bm 0, wbm 0, rxMotionDelay 0
      Accelerometer detected: yes, status: 00
      I2C bus errors 0, naks 0, other errors 0
      === Filament sensors ===
      Interrupt 5726621 to 0us, poll 9 to 433us
      Driver 0: no data received, errs: frame 0 parity 0 ovrun 0 pol 0 ovdue 0
      

      regards

      posted in Beta Firmware
      Frederikundefined
      Frederik
    • RE: Upcoming new Input Shapers

      @dc42
      perhaps a lot more people would consider using the sbc mode on duet3 boards, if it would offer more features / functionality as right now .

      most people dont want to hassle with another level of complexity, only to add wifi and offload the webapplication with a few plugins.

      Im personally looking forward what the future will bring. My Duet 3 is Running in sbc Mod + Lc1 v1 almost a Year now with very little trouble, while riding the unstable branch the whole time 🙂

      posted in Beta Firmware
      Frederikundefined
      Frederik
    • RE: Upcoming new Input Shapers

      @dc42 That are great news 🙂 I'm excited
      independent shapers for the duet 3 would be an amazing feature !

      Wouldnt it be possible to offload more task to the raspberry ?

      posted in Beta Firmware
      Frederikundefined
      Frederik
    • Upcoming new Input Shapers

      Hello,

      this question is probably best suited for @dc42

      1.What is the custom input shaper and how will it be different from the others ?

      2.Will it be possible to damp different frequencies on x and y with the a) the same input shaper or b) with different shapers ?

      3.When do you think, you release the first beta firmware for duet3 + sbc + lc1 v1.1 with the new shapers?

      TiA

      Kindly Regards
      Frederik

      posted in Beta Firmware
      Frederikundefined
      Frederik
    • RE: Toolboard Mounting (RatRig 500 V-Core) LGX/Magnum

      IMG_20210304_101735.jpg

      Picture with v1.0, v1.1 is mounted exactly the same

      Frederik

      posted in Duet Hardware and wiring
      Frederikundefined
      Frederik
    • RE: BlTouch - Probing with pin down ?

      @droftarts thanks a lot 🙂

      posted in Tuning and tweaking
      Frederikundefined
      Frederik
    • BlTouch - Probing with pin down ?

      Hello,

      would it be possible to probe with the Probepin always in the down position and only retract when finished ?

      Using a bltouch 3.1 with the standard P9 config and deployprobe.g and retractprobe.g files

      What would i need to change to use the probe in this mode ?

      Kindly Regards
      Frederik

      posted in Tuning and tweaking
      Frederikundefined
      Frederik
    • RE: Toolboard v1.1 Accelerometer Orientation and Setup

      @nuramori Thanks for the Info. Looking real nice ! What buildvolumoe do you have ? my vcore Pro is around 430x430x400mm and until now, i managed up to 410mm/s wiht a genuine BMG and a mosuqito magnum with 0.4mm Nozzle at 0.25mm Lh and 0.46mm Lw

      posted in Duet Hardware and wiring
      Frederikundefined
      Frederik
    • RE: Toolboard v1.1 Accelerometer Orientation and Setup

      @martin7404 i will have a look at the specs. since im using a Lc1 v1.1, i already have 24v,12v and even 5v to choose from, but i wanted to run the probe with 24V so i get a little bit better readings and distance

      posted in Duet Hardware and wiring
      Frederikundefined
      Frederik