Posts made by amcutem

@Phaedrux I would like to do that. But how?

Hello, my Delta was working for a while, then suddenly the hotend stopped working. I've replaced all the fuses and I don't know what else to do.

I keep getting a no change in temperature error and I've confirmed there's no output on the hotend terminal on the board.

Any help is great.

Thanks,

alex

@bearer

Sorry for the mistake.

It actually just shows bossa.

After writting the firmware, COMBINEDFIRMWARE, and shows success, it still shows as bossa and not DUET,then, nothing happens when i connect using YAT. Sometimes it connects, but no response from the board when i type a GCode.

Right now im trying to learn about jtag and if it can help.

Is there a duet repair place i can send it to?

Its a bummer if its shot already cuz its new.

@bearer

it shoes up as bossa or duet. But i can't communicate with it.

@Dougal1957

Yes. I've done all that. Anything else?

@Dougal1957 I did.
i pasted:

www
sys- firmware here
macros
gcodes

@dc42 yes


Thank you for replying.

That's what i thought also. But after I erased the SD and pasted correct files, it stopped working, and Yat keeps looking for port and then says it's busy. I've tried prontface, but no comm also. I've also uninstalled and installed everything again, but nothing.

I've attached a screen shot.

 image url)

hello, I finally converted my Rostock V2 to a Duet 085. I was able to install to the lates firmware from github and had it almost working, as in I was able to press home and the machined homed. I could also make it move down after homing.

However, i coudn't level it which I wanted to be able to do before i installed the FSR. I also made the mistake of uploading the other firmware, such as core ay, raddbin, etc.. and after doing this, when i started the machine, it still recognized it as a duet on the web browser. I played with it like that trying to figure out how to get it working completely,

Being confident that i got that far, I decided to delete everything on the SD CARD so that i could start over and load only the neccesary files. Once i did that, and inserted the SD card back into the duet 085 board, it stopped working and no more blinking. There's a green and red led beside the erase button and a red led stuck on when i plug my micro usb cable. It also seems that it doesn't respond to bossa anymore although it shows on the port and im able to write the Combinefirmware bin. Nothing blinks also. I thought i remembered it blinking.

Have I bricked my board? MY gf got this for me as a present and it's brand new, except i never installed it. I was afraid this might happen.

If anyone can help, that would be great. My friend also left his JTAG here and im not sure if that could help. The name is all i know about JTAG.

sincerely,

Alex

Hi, I would love to follow this instruction. I already have the Duet 085 and the Panel Due 7". I guess this would be very similar to my Rostock Max V2?

Hi guys, my name is Alex and I'm from BC Canada. I own a Rostock Max V2 which I built from a kit which I also upgraded with an E3D V6 and BondechQR.

I would really like to have a 32 bit board on the Rostock because of the calibration capabilities, but I feel intimidated with the tweaking. I've already purchased a Duet 085, and paneldue with 7" display. I think all I need now is an FSR sensor which I heard good things about.

I know I'll probably have no issues with the wiring and connectors, but it's the after loading the firmware part that might give me a headache. Can somebody give me advice on any available resources while I wait for the FSR sensors…..???

I'm sorry If this question has been posted before