@T3P3Tony I will as soon as I get home and post the report. Thank you

so the issue I am having now it’s extruding way too much if I ask for 10mm I get over 100 my steps per mm are 420 on the aero 2.85 mm with a .5 nozzle.

@droftarts Its seem to be working , I see that now thank you for explaining I really appreciate the help.

@Phaedrux Yes that seems to have fixed it !!

@anthonym Error: in file macro line 26: M92: array too long, max length = 1

@Phaedrux said in Duet mini 5 lulzbot won’t drive extruder:

M98 P"config.g"

Error: in file macro line 27: M566: array too long, max length = 1

@Phaedrux Yes

@droftarts still does the same thing. I have another stepper I also tried and same thing. if I move over to the x driver it works. Same basically it wont drive e.

@droftarts M350 X16 Y16 Z16 E16: I1 ; configure microstepping with interpolation
M92 X80 Y80 Z80 E420:80 ; set steps per mm
M566 X900 Y900 Z150 E420:150 ; set maximum instantaneous speed changes (mm/min)
M203 X6000.00 Y6000.00 Z300.00 E120.00: ; set maximum speeds (mm/min)
M201 X500.00 Y500.00 Z300.00 E250.00: ; set accelerations (mm/s^2)
M906 X1300 Y1300 Z1300 E150: I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout

@Phaedrux the motor will turn outside but has no torque can stop it by hand.