Try with Cura 4.5.0, the new official version 4.6.0 seems bugged.
Best posts made by brisma
Latest posts made by brisma
I was wondering if it was possible to implement a confirmation dialog (maybe in the paneldue/dwc) now that we have some type of logic gcode.
I was thinking about a simple custom Confirm/Cancel dialog
For example, if filament runout, a confirmation dialog appear to assist the unload/load of the filament.
The best will be if the buttons can be customized to stop/continue the gcode or call macros.
Can be an idea?
RE: Print stuttering around curves, LaErrors
M566 X480.00 Y480.00 Z30.00 E10000.00 ; Set maximum instantaneous speed changes (mm/min)
166mm/s of jerk on extruder? Try lowering to 600 (10mm/s)
M906 X1400.00 Y1400.00 Z900.00 E1428.00 I30
Why 1428 (that's useless) and not 1400 on extruder?
Are you on direct or bowden system? Can you try a print without PA?
Just comment this line:
; Pressure Advance ; M572 D0 S0.05 ; Enable pressure advance and set it. Marlin setup used a K of 0.03-0.05. HatchBox Wood K=0.03.
RE: Artifact ONLY on #3DBenchy...
The size is correct... very strange
I've a custom HEVO, printed with PLA at 200/60°C at maximum 60mm/s with this config:
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation M92 X80 Y80 Z400 E860 ; set steps per mm M566 X600 Y600 Z120 E900 ; set maximum instantaneous speed changes (mm/min) M203 X15000 Y15000 Z600 E1800 ; set maximum speeds (mm/min) M201 X1000 Y1000 Z240 E5000 ; set accelerations (mm/s^2) M906 X1300 Y1300 Z1300 E1300 I30 ; set motor currents (mA) and motor idle factor in per cent
DuetWifi with RRF 3.01RC9
RE: rincoglionito io?
@Leblond Mah guarda, sono italiano anch'io... eppure leggo e scrivo in inglese, basta avere la voglia ed il tempo di impararlo
In ogni caso, aggiorna prima a 3.0 usando questa guida:
RE: Tuning Hypercube Evolution Extrusion quality
Then, I will try changing my configuration with these new settings:
M566 X600 Y600 Z120 E900:900 ; Set maximum instantaneous speed changes (mm/min) M203 X18000 Y18000 Z600 E18000:18000 ; Set maximum speeds (mm/min) M201 X3000 Y3000 Z250 E6000:6000 ; Set accelerations (mm/s^2) M572 D0:1 S0.20 ; Pressure advance