Topics created by camposm7

If the PanelDue powers up - ie displays something don't make the mistake I made and press the buttons on the panel and erase the firmware. If you do it's fairly easy to upload the firmware using Bossa and the USB connector.

https://duet3d.dozuki.com/Wiki/Connecting_an_LCD_control_panel#Section_Connecting_a_PanelDue

After I had the screen displaying information it sat on a screen saying connecting. I changed out the cable for a 2nd one, still had the same issue. Turned out a poor crimp on the connectors that failed only when plugged in. Very annoying fault.

@camposm7 Would you be able to start a new thread for your new board? Let's leave your old thread behind. It took me a while to go through the whole thread to figure out where we are at.

In your new thread, include your duet board type, the firmware version installed, the results of M122 and M98 P"config.g" and a copy of your config.g and homing files. If there is a specific piece of hardware not working include details about how you have it wired. Photos/videos are also helpful.