@Phaedrux It looks like I am on 3.3RC? and 3.4.0 DWC version
I suppose I need to upgrade to 3.4 - off to find out how

@Phaedrux It looks like I am on 3.3RC? and 3.4.0 DWC version
I suppose I need to upgrade to 3.4 - off to find out how

I have had this happen to me several times. The first time I assumed I did something wrong as I was setting up my printer. This last time I was printing, then turned it off for a month or so, tonight turned it back on and no config.g file. Well I have the file but it is empty. This is most frustrating and I hope it is getting sorted out.

@adras maybe because of this:

"Yes, it is. Got it from china yikes"

@dc42 The accel needs to stay IMHO. it is always needed for tuning.
I for 1 would be fine losing all the connectors for solder pads, but I have been soldering for many years.

I would say the fans can be 24V only. after all if you need 12v fans run a 12v power supply LOL

I can't speak to the extruder power yet

@dc42 Thanks dc, that makes perfect sense. So really it is another case of theirs is really inferior as normal. So no way to make it smaller either.
I assume there are no unneeded functions on the 1LC.

Also to be clear I am the same person from openPNP that wants to modify the board.
I haven't given up that yet.

I am trying to understand why the 1LC has so many more components then the Ebb. I want to figure out how to make the 1LC smaller to fit the mini extruders using nema 14 round steppers. But first I need to understand what the 1LC has that Ebb does not have