Best posts made by ecnsupplies

@Phaedrux said in BL touch bed lowering till bl touch errors out from not touching:

M557

I found the issue!. On ender 5 the bed size under axis limits is X220 Y220 Z300
Because the probe sticks out over 2 inches on X from the nozzle i adjusted the x to 208 instead of 220. It is now working.
Now just need to work on leveling the bed. Hope this is all i will need.
I appreciate all your help.

@fcwilt
Made a test pattern to measure 25mm on each axis and jogged to each. They are exact.

@fcwilt
I downloaded a different slicer and will run it tonight just so I can say I did.
Let you know tomorrow

@ecnsupplies
Swapped the m307H0 R0.532 K0.167:0.000 D13.56 E1.35 S1.00 B0 added it to hotend and put back the bed defaults all working! thank you