Best posts made by Gaou

@jay_s_uk said in Smart Effector slipping.:

@gaou i'm not sure what you mean by slipping.
Can you post a video?

sure when i got home i ll post one ....

i ve managed to get some results working a bit with lightburn. i also noticed ( i have read it already) that both lightburn and laserweb can connect to the duet3d . I didn't try to control the the machine through them . i am using the web interface at the moment.

a short video

the upper right one is the clearest one but it still needs some more tweaking.

i am using both of the pwm fans output to control the laser ( FAN0) and the exhaust fan (FAN1) and the workaround for the second fan is to replace the M8 M9 from Lightburn to M106 P1 S1 or S0

@phaedrux said in Smart effector duet 0.85 wiring:

@gaou said in Smart effector duet 0.85 wiring:

But which is which

Have you seen this?

https://duet3d.dozuki.com/Wiki/Smart_effector_and_carriage_adapters_for_delta_printer#Section_Connectors_and_Wiring

thanks mate for posting

yeap i ve seen this . that was my guide . i just had to read it more than 10 times..... finally i got everyting set up and working as they should . i just couldn't find the pinout diagrams for the 0.85....

now i am waiting for my rods to test the effector in reality . it seems as a pretty good toy ...

@dougal1957 why ?

ok my mistake . my dive height is 10 at this moment .