Topics created by gta18

@gta18 I’ll have another look at the config.g you posted at the beginning of the thread, and try it on my Duet WiFi.

Also, can you post a picture of your board? I know it’s probably a clone from Amazon, but would be good to see if it is genuine.

Ian

The M569 command worked! thanks! no more bugging by driver 3! now onto waiting for the replacement driver and figuring out why my board hangs up after booting intermittently before this chip burned out.

@droftarts said in Burnt Driver 3 on Duet Wifi:

@gta18 said in Burnt Driver 3 on Duet Wifi:

So this adding this per @droftarts M569 P3 R-1 will disable the alarm for driver 3 or all alarms?

This should disable (that's the R-1 part) the warnings for driver 3 (that's the P3 part). I thought this should work even with driver removed from the board, but have never tested. Please report your findings!

Ian

@droftarts said in Burnt Driver 3 on Duet Wifi:

@gta18 said in Burnt Driver 3 on Duet Wifi:

So this adding this per @droftarts M569 P3 R-1 will disable the alarm for driver 3 or all alarms?

This should disable (that's the R-1 part) the warnings for driver 3 (that's the P3 part). I thought this should work even with driver removed from the board, but have never tested. Please report your findings!

Ian