Topics created by hmortensen

Thank you, I used the M208 option like this:
M208 X0 Y-12 Z0 S1 ; set axis minima
M208 X235 Y235 Z250 S0 ; set axis maxima

@chrishamm Thank you, that did fix both problems.
Didn't work in first try, as when I created a macro file it had no extension and I tried calling it with '.g'.
Is it possible to force it into error state instead of just yielding a warning if the macro doesn't exist?

I went with the custom macro approach, as I guess the start.g macro would be called before the actual print file and then I would miss the option of setting temperature in the slicer.

I made a new directory prefixed with a dot and it had the expected effect of hidding it from the dashboard 🙂

@hmortensen
This site has serveral pancake stepper motor, you can have a look
https://www.oyostepper.com/category-64-b0-Pancake-Stepper-Motor.html

Thank you, I'm just using fan2 for now.

@hmortensen can you elaborate?