Topics created by jacksat

glad I could help.
Please check thoroughly all motors and wiring. According to my own experience with stepper motors, it is extremely difficult to damage one. If one motor doesn't respond as usual, it's usual anything else but not the motor itself.

@deckingman said in No manual extrusion here (hot nor cold)??:

@jacksat Have you selected a tool before you attempt to extrude? If not, just enter T0 from the console, then try.

Yes ,i did but same result.
But i think it is solved now,need to do more testing but too F-ing hot in the shop where the printer lives.
I did a reinstall of the firmware and then i deselect and select the tool again and now both extruders work when i push extrude 10mm.
Don't know if the reinstall fixed it or deselect and then select the tool again did.
Thanks for thinking along .