Topics created by jdjeff58

@Phaedrux Ok now I get it. That makes sense. Thanks!

@jdjeff58 said in DWC Local cache:

@droftarts said in DWC Local cache:

What firmware version? The config.g says 2.03, but send M115 and post response.

Ian

Another Duet curveball. The RRF config tool (https://configtool.reprapfirmware.org/General) does NOT have 2.04 as a choice in the drop down. I showed my FW version in the first line of my post 2.04

M115

FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.04 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-11-01b1

Thanks for reporting this! We'll get it changed. 2.04 and 2.05 are upwards compatible with 2.03, so select 2.03.

@Phaedrux said in Need Help Core XY:

Ah I see. So the X axis endstop is on the frame, not on the print head. Then yes, you will need to home Y first to get X into position.

Yeah...I'll mark this as solved since this is where I was really stuck. Thanks and I will likely be posting again as I move forward..LOL

@jdjeff58, I meant 2000 or 3000. And as your Z axis is belt driven, that explains why it can do a high Z speed.