Topics created by JonasBaleine

@Exerqtor I bought the clone paneldue in 2019. Never got it working then, but had not tried that hard either. I did flash the v3 7in firmware this morning by mistake and the colors were all messed up on the display.

@Phaedrux Thanks, it seems to solve my issue!

@jonasbaleine the original part number is probably HB950-9.50-4P but there are likely to be alternatives. Search for "9.5mm pitch 4 way barrier terminal block". For example, YK4410403000G looks suitable.

sounds like something is shorted and the power supply is triggering its short circuit / overload protection?

anyways, disconnect stuff to see if the fault is external to the board and follow https://duet3d.dozuki.com/Wiki/What_to_do_if_your_Duet_won't_respond to see if you can get the board to work.