Topics created by lapjoint

@taconite said in Duet 2 WiFi: 3.1.1, 3.2.2 upgrades fail, 3.0.0 works ok:

For Duet2 Wifi it happens that the Wifi Server FW gets corrupted and needs to be installed manually (e.g. via Pronterface). This happend to me multiple times from 3.0.0 onwards.

Manually sending M997 S1 to re-flash the wifi module usually does it.

@droftarts PS. Yeah, I had tried that. Naming the fans made them show up indeed, but the sliders didn't do anything. Upgrading to the current firmware then did the trick.

Thanks everybody, @droftarts put me on the right track. Indeed my config.g was truncated. I was being too clever for my own good: I tried to deploy my config.g from a git repository on my computer using lftp, and it seems the config got mangled during the ftp upload.

I re-uploaded the config through the web interface and now everything is back to normal.

Thanks again!
Christoph

This is what you want: https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors

Thanks everybody!