i can't find the settings for auto levelling the bed as I want it:
I have a CoreXY-Printer with 3 independent Z-Leadscrews. Every Z-Axis has an endstop at its top position (z=0). What I am trying to do:
Step: Home all axes with the use of the endstops:
This works, and even a manually heavy tilted bed is levelled by individually moving all 3 Z-
Axes until all endstops are active.
Step: After the "rough" bed levelling via the endstops (Step 1), I want to use a BL-Touch-Sensor
to create a .csv Map. This works as well. Right now, in the heightmap I can see that the
Bed is tilted in one direction. This should be caused by small height differences of the
Step: If i activate Mesh Bed compensation, i can see that the bed moves up and down if i move
the Hotend along the y-axis. It does what it should do, but I want the bed to detect that it
is still tilted after endstop homing and correct its 3 z-axes accordingly after heightmap
creation. Instead of the z-correction while moving in the xy-plane, i want the bed to level
itself before printing.
So is this only possible, if i just use homing via z-Probe( BL-Touch) instead of endstop homing?
Of course i can adapt the endstop positions, but this would be the more elegant way to go in my eyes.