@phaedrux
Z-ENDSTOP CABLE NOT CONNECTED :
endstop light off
; Endstops
M574 X2 S1 P"xstop" ;
M574 Y2 S1 P"ystop" ;
M574 Z2 S1 P"zstop" ;
Running M119 :
Result :
Endstops - X: not stopped, Y: not stopped, Z: at max stop, Z probe: not stopped
Z-ENDSTOP CABLE NOT CONNECTED :
endstop light off
; Endstops
M574 X2 S1 P"xstop" ;
M574 Y2 S1 P"ystop" ;
M574 Z2 S1 P"!zstop" ;
Running M119 :
Result :
Endstops - X: not stopped, Y: not stopped, Z: not stopped, Z probe: not stopped
---------------------------------------
e0-ENDSTOP CABLE CONNECTED :
endstop light on
; Endstops
M574 X2 S1 P"xstop" ;
M574 Y2 S1 P"ystop" ;
M574 Z2 S1 P"e0stop"
Running M119 :
Result : M119
Endstops - X: not stopped, Y: not stopped, Z: at max stop, Z probe: not stopped
E0-ENDSTOP CABLE CONNECTED :
endstop light on
; Endstops
M574 X2 S1 P"xstop" ;
M574 Y2 S1 P"ystop" ;
M574 Z2 S1 P"!e0stop" ;
Running M119 :
Result :M119
Endstops - X: not stopped, Y: not stopped, Z: not stopped, Z probe: not stopped
Again I tried : Dashboard DWC home all and all motors move but z-motor does not stop beside of endstop light went off:
Does it mean, that by Duet Wifi Board is defect ? or before assuming this, do you want me to install a brand new endstop with cable etc.. again ? and see what happens ? thank
linus