Release Notes 3.4.1-pre1

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

• M291 S3 message not cleared
• Fix m291 jogging axes shown
• Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
  • https://github.com/phoboslab/qoi/

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1-pre1

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

Hey guys,

is this the final release candidate? You tell me...

Have a good start into the week...

Release notes and firmware images as usual on github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc4

Hey,

to improve the input shaping calibration experience we want to introduce the Input Shaping Plugin. So far it is a standalone but might get merged into DuetWebControl at later point.

It is based on DWC's Accelerometer Plugin and brings the following features:

• setting parameters for recording accelerometer profile
• start recording accelerometer profile
• automated download and analysis of the recorder profile
• preset of ringing frequency with the maximum amplitude
• setting of input shaping parameters

As this plugin is still in an early stage any feedback, bug reports, feature requests or wishes is helpful. So don't hesitate and leave a comment. Enjoy printing...

Release Notes inputshaping-plugin-0.1.0-rc2

Features

• setting parameters for recording accelerometer profile
• start recording accelerometer profile
• automated download and analysis of the recorder profile
• preset of ringing frequency with the maximum amplitude
• setting of input shaping parameters

Bugs

Downloads

Downloads can be found at https://github.com/mfs12/DuetWebControl/releases/tag/inputshaping-plugin-0.1.0-rc2

Link to the github issue. Any development done on this topic will be reflected there.

https://github.com/Duet3D/PanelDueFirmware/issues/132

mfs12 created this issue in Duet3D/PanelDueFirmware

closed Macro buttons are not displayed in some cases #132

Hallo,

here a new official version of PanelDue.

Special thanks goes out to @Fred-Y, @cosmowave, @Aitor, @RomanVin who helped me to review and fix most translations.

Release Notes 3.4.0

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

• add cross-platform headless builds based on cmake
• cleaned up dim/screensaver handling
• removed compiler warnings
• enabled Russian localization by default
• enabled Ukrainian localization by default
• improved list-locales tool for translation debugging
• fixed displaying of M291 S2 and S3 if followed by M292
• fixed displaying macro buttons in control tab
• fixed setting of serial baud rate after reboot
• cleaned up English
• cleaned up Czech translation
• cleaned up French translation
• cleaned up German translation
• fixed access to second sd card
• cleaned up Russian translation
• fixed persistent pressed button handling in some dialogs
• fixed updates via RRF
• fixed displaying of multiple heaters per tool
• improved readme
• fix brightness handling during pop-ups
• disabled spammy debug information
• show babystep button if printer is idle
• cleaned up Spanish translation
• change default feedrates
• extend m291 popup to allow movement of other axis, up to 10
• updated RRFLibraries
• fixed babystep button alignment in setup tab
• moved popup code into separate module
• show connection loss in status
• show warning when more than 2 malformed successive request responses are received
• log status changes console
• add support for ccache to speed up compilation

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

Hey,

new version of Paneldue Firmware was released.

Release Notes

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

3.4.1-pre1:

• M291 S3 message not cleared
• Fix m291 jogging axes shown
• Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
  • https://github.com/phoboslab/qoi/

3.4.1-pre2:

• improved file detail popup layout
• use faster stack size calculation when not debugging
• updated RRFLibrary
• added CRC16 to gcode request
  • by default CRC16 is enabled
  • added option to disable checksum and CRC16 in gcode requests
• improved m291 jogging layout
• fixed m291 axis selection handling

3.4.1-pre3:

• fixed babystep button handling
• added polish translation
• update RRFLibraries

3.4.1:

• fixed babystep button handling

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1

Flashing instructions can be found at https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue

Hallo,

a new version of PanelDue Firmware was build and released.

This is still a release candidate which means it is not officially declared stable. So if you find any bugs please report them here in this thread.

Otherwise enjoy peaceful printing...

Firmware images and release notes can be found on github. Just follow the link below.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc1

Hey,

a new release candidate is available. No bug fixed but new features.

Release notes and firmware images can be found on github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc5

Hey guys,

here's the next release candidate.

Hopefully all bugs reported are fixed.

For details and download please visit github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc2

Please re-test with the following release...

https://forum.duet3d.com/topic/32532/paneldue-firmware-3-5-0-rc6-released

Hey people,

a new release candidate is build and available on github.

Firmware images and detailed release notes as usual on github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc6

Hey,

here' s a new release candidate... looking forward to your feedback.

For release details please refer to github

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc7

Hey @gregsaun, @oliof,

Paneldue is already ported to cmake. Check the github repo https://github.com/Duet3D/PanelDueFirmware

It runs perfectly within Arch Linux so integration with automated build based on docker or similar should be feasible.

I also started this work for RepRapFirmware. It brings basic support for the mini5+. It needs most of the configuration for other boards to be ported. Otherwise i think it's a good basis to start off.

Check https://github.com/mfs12/RepRapFirmware/tree/integrate-cmake-build-system

Release Notes inputshaping-plugin-0.1.0-rc3

Features

• setting parameters for recording accelerometer profile
• start recording accelerometer profile
• automated download and analysis of the recorder profile
• preset of ringing frequency with the maximum amplitude
• setting of input shaping parameters

Bugs

• fixed list of available input shaping algorithm

Downloads

Downloads can be found at https://github.com/mfs12/DuetWebControl/releases/tag/inputshaping-plugin-0.1.0-rc3

I just build my first release candidate for PanelDue.

Please feel invited to test and report your experience. Unfortunately i don't have 4.3 inch device so these are not yet tested. If you have a 4.3 inch device I am very happy to hear from you.

Release Notes 3.3.0-rc1

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools

Bug fixes:

• gracefully handle parsing errors in M409 K"<key>" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc1

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

Release Notes inputshaping-plugin-0.1.0-rc5

Features

• setting parameters for recording accelerometer profile
• start recording accelerometer profile
• automated download and analysis of the recorder profile
• preset of ringing frequency with the maximum amplitude
• setting of input shaping parameters
• added german translation
• improved setting of initial record profile parameters
• changed order of profile commands

Bugs

• fixed list of available input shaping algorithm
• fixed order of profile commands

Downloads

Downloads can be found at https://github.com/mfs12/DuetWebControl/releases/tag/inputshaping-plugin-0.1.0-rc5

Release Notes 3.3.0-rc2

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools

Bug fixes:

• gracefully handle parsing errors in M409 K"<key>" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs
• fix sending filename in M37

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc2

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

Thanks for the feedback.

I plan to do another release towards the end of the week.

The M291 screensaver bug got fixed. Will be part of 3.3.0-rc3.

release notes for inputshaping plugin 0.2.0-pre3

This work is based on the original acceleration plugin. Input shaping plugin tries to take
the input shaping calibration to a next level.

The current state is still EXPERIMENTAL!!!

Although it's experimental it brings already some handy features which is why i
am doing this release. Therefore please comment, give feedback, report bugs and share your
ideas.

requirements

• Duet Web Control 3.4.0-b4
• RepRap Firmware 3.4.0-b4

features

• restructre plugin to use vue components
• added test configuration component
• added recorder component
• added chart component
• use object model to determine status of test
• added add/delete of algorithm configurations
• added add/delete/select of records
• added add/delete/select of sessions
• display test parameters in chart component
• allow records with differing samples rates of up to 1%
• cleaned up debugging output
• added localization
• improved ui layout
• added component to manage multiple sessions

bugs

• fix initial filtering of records by axis

howto

initialize session

• switch to tab "initialize"
• create a new session or
• select an available session

configure session

• switch to tab "configure"
• configure your session session
• configure test parameters
• add as many input shaping algorithm configurations as you like
  • more than one per algorithm are allowed
  • this is good to compare different input shaping configuration of the same algorithm
• CAUTION: once a record in a session exists test parameters can't be changed anymore.

record profiles

• switch to tab "record profiles"
• press "run" button and wait until recording is done

frequency analysis

• switch to tab "frequency analysis"
• in "acceleration records" section you see a list of profiles recorded
  • clicking on the entry DELETEs it form the session!!! (it is lost!!!)
• in "filter" section the show/hidden graphs are displayed
  • un-checking an axis will hide or show all charts of an axis group
• in chart section
  • individual graphs can be shown or hidden by pressing the colour next to the name
• press "FFT" button to show FFT representation of the graph
• press "Time" button to show time representation of the graph

limitations

• currently no data is stored permanently!!!
• everything is volatile so avoid hitting browser's reload

what's next?

Potential next steps are

• store session in a local file or in browser's local storage or
• load session from local file or browser's local storage
• recommend input shaping parameters
• improve input validation
• add translations