Topics created by Milicig

@jay_s_uk no neither of those. I've had this board for almost years and did not treat it nice and it's still going strong. One of them is fixed by adding a jumper on the middle 2 pins underneath the fans. But one of them is still only fully turning on once I plug in the USB. Otherwise it's not getting the 5v and the fuses are good. Just strange they both had the same problem and one works with the jumper added and one doesn't.

@Milicig please send a clear picture of the board.

Yes you should be able to assign it to another driver with M584 as usual.

https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M584_Set_drive_mapping

M584 X# where # is the number of the driver you want to use from 0 to 5.

@phaedrux thanks for this. That's alright if I loose some functionality as long as I can get it to work. The board is almost new not really used and don't have money to just throw it away and buy a new one. I did just get the duet 3 but in using that in another build.