@phaedrux Got the sandisk card and the anker reader. did everything all over again, still had the same issues but then reuploading DuetWiFiServer.bin and DuetWebControl-SD.zip
files fixed the problem. thank you.

@deckingman said in How to obtain Microstepping:

BMG style extruder

Thank you for the detailed explanation;
Here is some of the details x,y,z: 200,130,150mm
Motors: Nema 17; https://www.amazon.ca/gp/product/B07MDY5RX7/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Board: Duet 2 Wifi
Power Supply: 600W, 24 V: https://www.amazon.ca/gp/product/B00DEDB2U2/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
Heatedbed:
https://www.amazon.ca/gp/product/B07MR59G18/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Pleas let me know if you need any other details.

@paulhew Duet 2 wifi is my board and I don't have any current config. Building this printer from scratch. Thank you.

@dc42 said in How to obtain Microstepping:

interpolation

Thank you for the reply; I looked at the description of the extruder again. It is indicating that it has internal gear ratio of 3:1 if this is what you are reffering;
SIMAX3D Dual Drive BMG Bowden Extruder utilizes an internal gearing ratio of 3:1 together with precision
cnc-machined hardened steel drive gears to give you a compact powerhouse for all your applications.

https://www.amazon.ca/gp/product/B085BLQSYV/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&th=1

Would it make sense to leave all the values as it appears in the pic I sent, up in my first message, and then tune it later based on its performance (other than the current value obviously). Please advise.

@jay_s_uk Thank you for the reply. My printer is not one of the known or over-the-counter printers that I can copy the parameters from. It is a custom made cartesian printer that is why I am little bit lost obtaining these parameters. Do you need any specific information about the printer to generate these motor values. Please advise.

Hi Everyone
Is there any detailed guideline explaining how to obtain the motor parameters that are requested in duet config tool;

Here is the stepper motors I use(Nema17);
https://www.amazon.ca/gp/product/B07MDY5RX7/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

@phaedrux Got the sandisk card and the anker reader. did everything all over again, still had the same issues but then reuploading DuetWiFiServer.bin and DuetWebControl-SD.zip
files fixed the problem. thank you.

@phaedrux Thank you for the clarification and the links;
I looked at the first link and everything seems to be straight forward other than adding the gcode folder;
'add a gcodes folder for your print files. these can be uploaded over the web interface.'
This statement doesn't really make sense for a duet noob like me. It doesn't have any detailed instruction or any link. Please advise.
I also run a quick speed test. My Sd card is little slower than what is given in the link;

Should I get a new SD card; Can you send me a link for an ideal SD card so I can purchase. Thank you.

@dc42 Thank you for bringing that to my attention. It is very disappointing to know that it is clone duet after paying over a hundred bucks.
How could you tell the difference by just looking at the pic of the board. Please advise.
(BTW I knew it was clone because it did not come with an SD card, I was told that that was one of the signs being clone duet).
IS there any disadvantages having a clone duet in terms of functionality, performance, setting it up, etc. Please advise.

@phaedrux Thank you for the reply. Changed the settings as advised.
Wifi firmware version 1.21
Thank you for the link. I will borrow an SD card reader from a friend tomorrow for the time being.
If M20 lists all the files in SD card; I don't seem to have the right files, see below.

@phaedrux if I understand correct my wifi version is 1.02 and I can ping, see below.

The LEDs appear to be ok

I don't have microSD card reader however I thought I could've access the SD card via USB connection to duet 2 board but I don't see any icon in 'This PC'

Do I have to get a Micro SD card reader to proceed. Please advise.