Posts made by npm1

thanks for your efforts

I'm just gonna call it a day, may use an optical setup it with one of those allen keys

@gloomyandy i knoq that the 5v cable is correctly connected ill switch the cables around and confirm to you shortly

@gloomyandy the only thing i can think of is to switch the cables on the zstop cables around

@gloomyandy endstop works with zero issues with everything triggered correctly

M119

Endstops - X: at min stop, Y: at min stop, Z: at min stop, Z probe: at min stop
2/25/2022, 9:38:20 PM g31
Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0
2/25/2022, 9:38:10 PM m119
Endstops - X: at min stop, Y: at min stop, Z: not stopped, Z probe: not stopped

will marlin be easier

Electronics
Diagnostics
Board: fly_E3 (STMWiFi)
Firmware: RepRapFirmware for STM32F4 based Boards 3.3RC2+1_1 (2021-05-13)
Duet WiFi Server Version: 1.26-01S-D

Note: You can install updates on the System page.

shall i update the firmware

@gloomyandy have I blown something on the board

@gloomyandy still no changes, the only thing that change is the z probe value being 1000 instead of zero

hope that helps

@gloomyandy removed z driver without m574 metal touching

G31

Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0
2/25/2022, 9:05:35 PM m119
Endstops - X: not stopped, Y: at min stop, Z: no endstop, Z probe: not stopped

@gloomyandy removed z driver without m574

g31

Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0
2/25/2022, 9:04:04 PM g31
2/25/2022, 9:03:53 PM M119
Endstops - X: not stopped, Y: at min stop, Z: no endstop, Z probe: not stopped

@gloomyandy removed z driver with m574 metal touching

g31
Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0
2/25/2022, 9:01:46 PM g31
2/25/2022, 9:01:24 PM M119
Endstops - X: not stopped, Y: at min stop, Z: not stopped, Z probe: not stopped

@gloomyandy

removed z driver with m574
g31
Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0
2/25/2022, 8:59:47 PM M119
Endstops - X: not stopped, Y: at min stop, Z: not stopped, Z probe: not stopped
2/25/2022, 8:59:44 PM M119
2/25/2022, 8:59:33 PM M98 P"config.g"
HTTP is enabled on port 80
FTP is disabled
TELNET is disabled

@gloomyandy with 574 and metal touching probe
g31
Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0
2/25/2022, 8:50:23 PM g31
2/25/2022, 8:50:05 PM m119
Endstops - X: not stopped, Y: at min stop, Z: not stopped, Z probe: not stopped

@gloomyandy
without m574 and with metal touching the probe

g31

Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0
2/25/2022, 8:46:38 PM g31
2/25/2022, 8:46:16 PM M119
Endstops - X: not stopped, Y: at min stop, Z: no endstop, Z probe: not stopped
2/25/2022, 8:45:56 PM M98 P"config.g"
HTTP is enabled on port 80
FTP is disabled
TELNET is disabled

@gloomyandy the first response is with m574 and the second response is without m574

@gloomyandy Without M574
M98 P"config.g"
HTTP is enabled on port 80
FTP is disabled
TELNET is disabled
Endstops - X: not stopped, Y: at min stop, Z: no endstop, Z probe: not stopped
Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0

@gloomyandy
With M574
M98 P"config.g"
HTTP is enabled on port 80
FTP is disabled
TELNET is disabled
Endstops - X: not stopped, Y: at min stop, Z: not stopped, Z probe: not stopped
G31
Z probe 0: current reading 0, threshold 500, trigger height 2.500, offsets X0.0 Y0.0